ogst
Home All issues Oil & Gas Science and Technology - Rev. IFP, 59 6 (2004) 593-609 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

CFD analysis of turbulent flow characteristics of charge inside the combustion chamber of a dual–fuel homogeneous charge compression ignition engine under varying swirl ratios

Navanth A., Karthikeya Sharma T. and Amba Prasad Rao G.
International Journal for Computational Methods in Engineering Science and Mechanics 26 (2) 169 (2025)
https://doi.org/10.1080/15502287.2024.2436874

A numerical framework for 3D Computational Fluid Dynamics (CFD) simulations of gasoline-fuelled burners to be adopted in catalyst preheating of vehicle exhaust systems

Stefano Sfriso, Fabio Berni, Stefano Fontanesi, Stefano Paltrinieri, Fabio Santi Mortellaro, Vincenzo Rossi, Luca Brocchi, Roberto Tonelli and Massimo Medda
Applied Thermal Engineering 263 125332 (2025)
https://doi.org/10.1016/j.applthermaleng.2024.125332

Partially-charged advanced low-temperature combustion in diesel engine: Progress and prospects

Thanh Tuan Le, Dhinesh Balasubramanian, Anh Tuan Le, Dao Nam Cao, Wei-Hsin Chen, Inbanaathan Papla Venugopal, Ümit Ağbulut, Thanh Hai Truong, Xuan Phuong Nguyen, Van Ga Bui and Anh Tuan Hoang
Alexandria Engineering Journal 129 373 (2025)
https://doi.org/10.1016/j.aej.2025.06.021

Detailed Investigation of Diesel-Gas Dual Fuel Combustion Phenomena by Means of Combustion Chamber Endoscopy and Three-Dimensional Computational Fluid Dynamics Simulation

Christoph Redtenbacher, Constantin Kiesling, Maximilian Malin, Andreas Nickl, Lucas Eder, Marcel Lackner and Andreas Wimmer
Journal of Engineering for Gas Turbines and Power 147 (10) (2025)
https://doi.org/10.1115/1.4067917

Turbulent combustion modeling for internal combustion engine CFD: A review

S. Posch, C. Gößnitzer, M. Lang, R. Novella, H. Steiner and A. Wimmer
Progress in Energy and Combustion Science 106 101200 (2025)
https://doi.org/10.1016/j.pecs.2024.101200

Attaining improved control over the start of combustion in dual-fuel HCCI engine through the influence of EGR

Ch. Mohana Simhadri Apparao, T. Karthikeya Sharma and G. Amba Prasad Rao
Journal of Thermal Analysis and Calorimetry 149 (23) 13993 (2024)
https://doi.org/10.1007/s10973-024-13690-8

Impact of fuel surrogate formulation on the prediction of knock statistics in a single cylinder GDI engine

Stefano Fontanesi, Fabiyan Angikath Shamsudheen, Edwing Grajales Gonzalez, S Mani Sarathy, Fabio Berni, Alessandro d’Adamo, Massimo Borghi and Sebastiano Breda
International Journal of Engine Research 25 (3) 405 (2024)
https://doi.org/10.1177/14680874231195742

Numerical analysis of mixing and combustion characteristics of a lateral swirl combustion system in OP2S diesel engines

Wei Yang, Feng Li, Fu-kang Ma and Jun-feng Xu
Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 238 (1) 147 (2024)
https://doi.org/10.1177/09544070221121874

Comparison of Tabulated and Complex Chemistry Approaches for Ammonia–Diesel Dual-Fuel Combustion Simulation

Dominik Krnac, Bhuvaneswaran Manickam, Peter Holand, Utkarsh Pathak, Valentin Scharl and Thomas Sattelmayer
SAE International Journal of Engines 17 (7) (2024)
https://doi.org/10.4271/03-17-07-0055

Numerical assessment of polyoxymethylene dimethyl ether (OME3) injection timing in compression ignition engine

Marijan Marković, Filip Jurić, Dominik Pečaver Šošić, Carsten Schmalhorst, Anh Tuan Hoang and Milan Vujanović
Clean Technologies and Environmental Policy 26 (1) 149 (2024)
https://doi.org/10.1007/s10098-023-02619-8

Numerical investigation of combustion characteristics of extended coherent flame model 3 zones (ECFM‐3Z) in diesel engines running with biodiesel

Şeyma Karahan Özbilen, Emrullah Hakan Kaleli and Emir Aydar
Environmental Progress & Sustainable Energy 43 (5) (2024)
https://doi.org/10.1002/ep.14422

Computational fluid dynamic analysis of the effect of inlet valve closing timing on common rail diesel engines fueled with butanol–diesel blends

Venkatesh T. Lamani, K. V. Shivaprasad, Dibyendu Roy, Ajay Kumar Yadav and G. N. Kumar
Frontiers in Energy Research 12 (2024)
https://doi.org/10.3389/fenrg.2024.1447307

Thermal analysis by numerical simulations of a multilayered coating applied on a heavy-duty diesel engine piston

Paul-Georgian Luca and Adèle Poubeau
International Journal of Engine Research 25 (10) 1942 (2024)
https://doi.org/10.1177/14680874241261132

Optical and Numerical Study on Micropilot Diesel Fuel-Ignited Methane Combustion Process under Different Diesel Fuel Injection Strategies

Longlong Jiang, Wuqiang Long, Hua Tian, Jiangping Tian, Zechuan Cui, Yang Wang, Ge Xiao, Xiangyu Meng, Peng Wang and Mingfei Lu
Journal of Energy Engineering 150 (5) (2024)
https://doi.org/10.1061/JLEED9.EYENG-5603

Computational investigation of equivalence ratio effects on performance and emissions in a dual-fuel homogeneous charge compression ignition (HCCI) engine with 90% n-dodecane and 10% ethanol

A. Navanth, T. Karthikeya Sharma and G. Amba Prasad Rao
International Journal of Ambient Energy 45 (1) (2024)
https://doi.org/10.1080/01430750.2024.2319637

Extended Coherent Flame Model applied to an optical single-cylinder engine fueled with ethanol

Guenther C. Krieger Filho, Filipi M. Fernandes Silva, Antônio L. Pacífico, Fernando L. Sacomano Filho, Clayton B. Zabeu, Francisco B. Nigro, Oswaldo M. França, Alexander Penaranda and Pedro T. Lacava
Applied Thermal Engineering 236 121399 (2024)
https://doi.org/10.1016/j.applthermaleng.2023.121399

Exploring Hydrogen–Diesel Dual Fuel Combustion in a Light-Duty Engine: A Numerical Investigation

Francesco Scrignoli, Alfredo Maria Pisapia, Tommaso Savioli, Ezio Mancaruso, Enrico Mattarelli and Carlo Alberto Rinaldini
Energies 17 (22) 5761 (2024)
https://doi.org/10.3390/en17225761

An integrated 0D/1D/3D numerical framework to predict performance, emissions, knock and heat transfer in ICEs fueled with NH3–H2 mixtures: The conversion of a marine Diesel engine as case study

Fabio Berni, Valentina Pessina, Luigi Teodosio, Alessandro d’Adamo, Massimo Borghi and Stefano Fontanesi
International Journal of Hydrogen Energy 50 908 (2024)
https://doi.org/10.1016/j.ijhydene.2023.09.158

Data-driven modeling of energy-exergy in marine engines by supervised ANNs based on fuel type and injection angle classification

Hadi Taghavifar and Lokukaluge P. Perera
Process Safety and Environmental Protection 172 546 (2023)
https://doi.org/10.1016/j.psep.2023.02.034

A method of matching the combustion chamber diameter based on spray characteristics for lateral swirl combustion system

Jiang Chang, Xiangrong Li, Yanlin Chen, et al.
Fuel 348 128575 (2023)
https://doi.org/10.1016/j.fuel.2023.128575

Effects of pre-chamber flow-field on combustion stability in a spark-ignition engine using large-eddy simulations

R. Novella, J. M. Pastor, J. Gomez-Soriano and I. Barbery
Physics of Fluids 35 (11) (2023)
https://doi.org/10.1063/5.0169655

Optimization via genetic algorithm of a variable-valve-actuation spark-ignition engine based on the integration between 1D/3D simulation codes and optimizer

Luigi Teodosio and Fabio Berni
International Journal of Engine Research 24 (4) 1760 (2023)
https://doi.org/10.1177/14680874221099874

Laminar flame speed correlations for dual fuel flames in high-pressure conditions

Luís Eduardo de Albuquerque Paixão e Freire de Carvalho and Fernando Luiz Sacomano Filho
Fuel 334 126804 (2023)
https://doi.org/10.1016/j.fuel.2022.126804

Modeling of gaseous emissions and soot in 3D-CFD in-cylinder simulations of spark-ignition engines: A methodology to correlate numerical results and experimental data

Fabio Berni, Fabio Mortellaro, Valentina Pessina, Stefano Paltrinieri, Francesco Pulvirenti, Vincenzo Rossi, Massimo Borghi and Stefano Fontanesi
International Journal of Engine Research 24 (5) 2149 (2023)
https://doi.org/10.1177/14680874221112564

Multi-Objective Optimization of the Structural Design of a Combustion Chamber of a Small Agricultural Diesel Engine Fueled with B20 Blend Fuel at a High Altitude Area

Zhipeng Shi, Jun Wang, Xiangchi Guo and Xueyuan Liu
Sustainability 15 (15) 11617 (2023)
https://doi.org/10.3390/su151511617

Development and Validation of a CFD Combustion Model for Natural Gas Engines Operating with Different Piston Bowls

Giovanni Gaetano Gianetti, Tommaso Lucchini, Gianluca D’Errico, Angelo Onorati and Patrik Soltic
Energies 16 (2) 971 (2023)
https://doi.org/10.3390/en16020971

High Quality Multi-Zone and 3D CFD Model of Combustion in Marine Diesel Engine Cylinder

Dominika Cuper-Przybylska, Van Nhanh Nguyen, Cao Dao Nam and Jerzy Kowalski
Polish Maritime Research 30 (2) 61 (2023)
https://doi.org/10.2478/pomr-2023-0021

A review of computational studies on the effect of physical variables in direct injection diesel engines

R. Manimaran
Australian Journal of Mechanical Engineering 21 (3) 733 (2023)
https://doi.org/10.1080/14484846.2021.1913871

Influences of a variable nozzle turbocharger on the combustion and emissions of a light-duty diesel engine at different altitudes

Jun Wang, Lizhong Shen, Yuhua Bi and Jilin Lei
Fuel 349 128626 (2023)
https://doi.org/10.1016/j.fuel.2023.128626

Experimental studies on the particulate matter emission characteristics of a lateral swirl combustion system for direct injection diesel engines

Dong Liu, Xiangrong Li, Liang Xie, Jiang Chang, Yuning Kang and Zhi Zhang
Environmental Pollution 330 121756 (2023)
https://doi.org/10.1016/j.envpol.2023.121756

Analysis of an innovative combustion chamber with the wall guided fuel injection in a small diesel engine

İlker Temizer, Öncel Öncüoğlu and Ömer Cihan
International Journal of Engine Research 24 (9) 3954 (2023)
https://doi.org/10.1177/14680874231176633

Quantitative investigation on the impact of injection timing on soot formation in a GDI engine with a customized sectional method

Stefano Fontanesi, Marco Del Pecchia, Valentina Pessina, Simone Sparacino and Silvana Di Iorio
International Journal of Engine Research 23 (4) 624 (2022)
https://doi.org/10.1177/1468087421993955

Numerical investigation to explore the influence of combustion chamber modification on combustion and emission of a diesel engine fuelled with biodiesel

Shahanwaz Khan, Rajsekhar Panua and Probir Kumar Bose
International Journal of Ambient Energy 43 (1) 4701 (2022)
https://doi.org/10.1080/01430750.2021.1919549

The effect of fuel injection pressure and combustion chamber configuration on fuel spray, combustion and emissions of a direct injection diesel engine: a CFD approach

Shahanwaz Khan, Rajsekhar Panua and Probir Kumar Bose
International Journal of Ambient Energy 43 (1) 6932 (2022)
https://doi.org/10.1080/01430750.2022.2059003

Effects of combustion chamber diameter on comprehensive performance of the lateral swirl combustion system under various conditions

Xiangrong Li, Jiang Chang, Yanlin Chen, Dong Liu and Yuning Kang
Fuel 312 122925 (2022)
https://doi.org/10.1016/j.fuel.2021.122925

Multidimensional Computational Fluid Dynamics Combustion Process Modeling of a 6V150 Diesel Engine

Zhentao Liu, Yu Zhang, Jiahong Fu and Jinlong Liu
Journal of Thermal Science and Engineering Applications 14 (10) (2022)
https://doi.org/10.1115/1.4054164

CFD modelling and numerical investigation of a large marine two-stroke dual fuel direct injection engine

Renyou Yang, Gerasimos Theotokatos and Dracos Vassalos
Ships and Offshore Structures 17 (5) 1062 (2022)
https://doi.org/10.1080/17445302.2021.1893533

Effects of hydrogen-rich products from methanol steam reforming on the performance enhancement of a medium-speed marine engine

Zibin Yin, Wenwei Cai, Zhuo Zhang, Zijin Deng and Zhiyong Li
Energy 256 124540 (2022)
https://doi.org/10.1016/j.energy.2022.124540

Numerical modeling of diesel and polyoxymethylene dimethyl ether spray in a high pressure chamber using the fischer primary breakup model

Tim Beutler, Niklas Prchal and Michael Günthner
Automotive and Engine Technology 7 (3-4) 409 (2022)
https://doi.org/10.1007/s41104-022-00120-w

Numerical Optimization of the EGR Rate and Injection Timing with a Novel Cavitation Model in a Diesel Engine Fueled with PODE/Diesel Blends

Yanju Wei, Chenyang Zhang, Zengqiang Zhu, Yajie Zhang, Dunqiang He and Shenghua Liu
Applied Sciences 12 (24) 12556 (2022)
https://doi.org/10.3390/app122412556

A new method to determine the causes of deviation in cylinder pressure curves of motored reciprocating piston engines

Christian Mährle, Stefan Held, Sebastian Huber and Georg Wachtmeister
International Journal of Engine Research 23 (2) 243 (2022)
https://doi.org/10.1177/1468087420984071

1D/3D simulation procedure to investigate the potential of a lean burn hydrogen fuelled engine

Luigi Teodosio, Fabio Berni, Alfredo Lanotte and Enrica Malfi
Journal of Physics: Conference Series 2385 (1) 012085 (2022)
https://doi.org/10.1088/1742-6596/2385/1/012085

Modelling Study of Cycle-To-Cycle Variations (CCV) in Spark Ignition (SI)-Controlled Auto-Ignition (CAI) Hybrid Combustion Engine by Using Reynolds-Averaged Navier–Stokes (RANS) and Large Eddy Simulation (LES)

Xinyan Wang and Hua Zhao
Energies 15 (12) 4478 (2022)
https://doi.org/10.3390/en15124478

Numerical assessment of ozone addition potential in direct injection compression ignition engines

Vincent Giuffrida, Michele Bardi, Mickael Matrat, Anthony Robert and Guillaume Pilla
International Journal of Engine Research 23 (1) 33 (2022)
https://doi.org/10.1177/1468087420973553

Effects of combustion chamber diameter on the performance and fuel–air mixing of a double swirl combustion system in a diesel engine

Yuning Kang, Xiangrong Li, Hongji Shen, et al.
Fuel 324 124392 (2022)
https://doi.org/10.1016/j.fuel.2022.124392

Numerical modeling of laminar flame speed and autoignition delay using general fuel-independent function

Filip Jurić, Marko Ban, Peter Priesching, Carsten Schmalhorst, Neven Duić and Milan Vujanović
Fuel 323 124432 (2022)
https://doi.org/10.1016/j.fuel.2022.124432

Effect of initial turbulence on combustion with ECFM-3Z model in a CI engine

Gaurav Mittal, Maharshi Subhash and Manoj Gwalwanshi
Materials Today: Proceedings 46 11007 (2021)
https://doi.org/10.1016/j.matpr.2021.02.097

Numerical investigation of multiphase reactive processes using flamelet generated manifold approach and extended coherent flame combustion model

Filip Jurić, Marija Stipić, Niko Samec, et al.
Energy Conversion and Management 240 114261 (2021)
https://doi.org/10.1016/j.enconman.2021.114261

A Data-Driven Methodology for the Simulation of Turbulent Flame Speed across Engine-Relevant Combustion Regimes

Alessandro d’Adamo, Clara Iacovano and Stefano Fontanesi
Energies 14 (14) 4210 (2021)
https://doi.org/10.3390/en14144210

CFD Modeling of Reacting Diesel Sprays with Primary Reference Fuel

Qiyan Zhou, Tommaso Lucchini, Gianluca D'Errico, Ricardo Novella, Jose M Garcia-Oliver and Xingcai Lu
SAE International Journal of Advances and Current Practices in Mobility 3 (5) 2433 (2021)
https://doi.org/10.4271/2021-01-0409

Effects of intake swirl on the fuel/air mixing and combustion performance in a lateral swirl combustion system for direct injection diesel engines

Yanlin Chen, Xiangrong Li, Shuainan Shi, Qingxu Zhao, Dong Liu, Jiang Chang and Fushui Liu
Fuel 286 119376 (2021)
https://doi.org/10.1016/j.fuel.2020.119376

Towards grid-independent 3D-CFD wall-function-based heat transfer models for complex industrial flows with focus on in-cylinder simulations

Fabio Berni, Giuseppe Cicalese, Massimo Borghi and Stefano Fontanesi
Applied Thermal Engineering 190 116838 (2021)
https://doi.org/10.1016/j.applthermaleng.2021.116838

Numerical investigation of injection parameters and piston bowl geometries on emission and thermal performance of DI diesel engine

Ikhtedar Husain Rizvi and Rajesh Gupta
SN Applied Sciences 3 (6) (2021)
https://doi.org/10.1007/s42452-021-04633-1

Combustion phase of a diesel/natural gas dual fuel engine under various pilot diesel injection timings

Zhongshu Wang, Fangyuan Zhang, Ye Xia, Dan Wang, Yun Xu and Guizhi Du
Fuel 289 119869 (2021)
https://doi.org/10.1016/j.fuel.2020.119869

Optimization of the combustion chamber geometry and injection parameters on a light-duty diesel engine for emission minimization using multi-objective genetic algorithm

Ramazan Şener and M. Zafer Gül
Fuel 304 121379 (2021)
https://doi.org/10.1016/j.fuel.2021.121379

Analysis of different combustion chamber geometries using hydrogen / diesel fuel in a diesel engine

İlker Temizer and Ömer Cihan
Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 43 (1) 17 (2021)
https://doi.org/10.1080/15567036.2020.1811808

CFD analysis of combustion and emission characteristics of primary reference fuels: from transient Diesel spray to heavy-duty engine

Qiyan Zhou, Tommaso Lucchini, Gianluca D’Errico, et al.
Fuel 301 120994 (2021)
https://doi.org/10.1016/j.fuel.2021.120994

Modeling heavy-duty diesel engines using tabulated kinetics in a wide range of operating conditions

Qiyan Zhou, Tommaso Lucchini, Gianluca D’Errico, Gilles Hardy and Xingcai Lu
International Journal of Engine Research 22 (4) 1116 (2021)
https://doi.org/10.1177/1468087419896165

Experimental and numerical investigation of the effect of fig seed oil methyl ester biodiesel blends on combustion characteristics and performance in a diesel engine

Ömer Cihan
Energy Reports 7 5846 (2021)
https://doi.org/10.1016/j.egyr.2021.08.180

Numerical simulation of a mixed-mode reaction front in a PPC engine

Christian Ibron, Hesammedin Fatehi, Zhenkan Wang, Panagiota Stamatoglou, Marcus Lundgren, Marcus Aldén, Mattias Richter, Öivind Andersson and Xue-Song Bai
Proceedings of the Combustion Institute 38 (4) 5703 (2021)
https://doi.org/10.1016/j.proci.2020.09.012

Experimental and numerical investigation of evaporating fuel films in combustion

N. Jüngst, N. Frapolli, Y.M. Wright, K. Boulouchos and S.A. Kaiser
Applications in Energy and Combustion Science 7 100033 (2021)
https://doi.org/10.1016/j.jaecs.2021.100033

Computational analysis of turbulence enhancement in a compression ignition engine with modified inlet design

Nandakumar Chinnamuthu, Saravanan Chidambaram Ganapathy, Vikneswaran Malaiperumal, et al.
Environmental Science and Pollution Research 28 (26) 33866 (2021)
https://doi.org/10.1007/s11356-020-10157-9

Advanced Combustion Modelling of High BMEP Engines under Water Injection Conditions with Chemical Correlations Generated with Detailed Kinetics and Machine Learning Algorithms

Leonardo Pulga, Stefania Falfari, Gian Marco Bianchi, Matteo Ricci and Claudio Forte
SAE International Journal of Advances and Current Practices in Mobility 3 (1) 77 (2020)
https://doi.org/10.4271/2020-01-2008

Computational assessment towards understanding the energy conversion and combustion process of lean mixtures in passive pre-chamber ignited engines

J. Benajes, R. Novella, J. Gomez-Soriano, I. Barbery, C. Libert, F. Rampanarivo and M. Dabiri
Applied Thermal Engineering 178 115501 (2020)
https://doi.org/10.1016/j.applthermaleng.2020.115501

Assessment of varying primary/secondary breakup mechanism of diesel spray on performance characteristics of HSDI engine

Hadi Taghavifar, Simin Anvari and S.H. Mousavi
Fuel 262 116622 (2020)
https://doi.org/10.1016/j.fuel.2019.116622

A methodology to formulate multicomponent fuel surrogates to model flame propagation and ignition delay

Marco Del Pecchia and Stefano Fontanesi
Fuel 279 118337 (2020)
https://doi.org/10.1016/j.fuel.2020.118337

Numerical investigation of lambda-value prechamber ignition in heavy duty natural gas engine

Ireneusz PIELECHA
Combustion Engines 181 (2) 31 (2020)
https://doi.org/10.19206/CE-2020-205

Towards a Predictive Simulation of Turbulent Combustion?—An Assessment for Large Internal Combustion Engines

Thomas Lauer and Jens Frühhaber
Energies 14 (1) 43 (2020)
https://doi.org/10.3390/en14010043

Gasoline-ethanol blend formulation to mimic laminar flame speed and auto-ignition quality in automotive engines

M. Del Pecchia, V. Pessina, F. Berni, A. d'Adamo and S. Fontanesi
Fuel 264 116741 (2020)
https://doi.org/10.1016/j.fuel.2019.116741

Optimization of a DI diesel engine to reduce emission and boost power by exergy and NLPQL method

Hadi Taghavifar and Simin Anvari
Environmental Progress & Sustainable Energy 39 (2) (2020)
https://doi.org/10.1002/ep.13338

Comparison Between Experimental and Simulated Knock Statistics Using an Advanced Fuel Surrogate Model

Francesco Cicci, Valentina Pessina, Clara Iacovano, Simone Sparacino and Alessio Barbato
E3S Web of Conferences 197 06012 (2020)
https://doi.org/10.1051/e3sconf/202019706012

CFD modelling of natural gas combustion in IC engines under different EGR dilution and H2-doping conditions

Mirko Baratta, Silvestru Chiriches, Prashant Goel and Daniela Misul
Transportation Engineering 2 100018 (2020)
https://doi.org/10.1016/j.treng.2020.100018

Numerical Study on the Effects of Tumble and Swirl on Combustion and Emission Characteristics of an LPG Direct Injection Engine

Hogyeom Kim, Seung Yeob Lee, Hyeong Jun Kim and Jin Taek Chung
International Journal of Automotive Technology 21 (3) 623 (2020)
https://doi.org/10.1007/s12239-020-0059-y

A threshold soot index-based fuel surrogate formulation methodology to mimic sooting tendency of real fuels in 3D-CFD simulations

Marco Del Pecchia, Stefano Fontanesi, Jens Prager, Cedomir Kralj and Harry Lehtiniemi
Applied Energy 280 115909 (2020)
https://doi.org/10.1016/j.apenergy.2020.115909

Numerical analysis of fuel injection configuration on nitrogen oxides formation in a jet engine combustion chamber

Damijan Cerinski, Milan Vujanović, Zvonimir Petranović, et al.
Energy Conversion and Management 220 112862 (2020)
https://doi.org/10.1016/j.enconman.2020.112862

Effect of exhaust gas recirculation rate on performance, emission and combustion characteristics of a common-rail diesel engine fuelled with n-butanol–diesel blends

Venkatesh Tavareppa Lamani, Ajay Kumar Yadav and Kumar Narayanappa Gottekere
Biofuels 11 (4) 389 (2020)
https://doi.org/10.1080/17597269.2017.1369631

Emission and performance analysis of DI diesel engines fueled by biodiesel blends via CFD simulation of spray combustion and different spray breakup models: a numerical study

Abbas Zarenezhad Ashkezari, Kambiz Divsalar, Rahim Malmir and Iman Abbaspour
Journal of Thermal Analysis and Calorimetry 139 (4) 2527 (2020)
https://doi.org/10.1007/s10973-019-08922-1

A novel technique for detailed and time-efficient combustion modeling of fumigated dual-fuel internal combustion engines

Gilles Decan, Tommaso Lucchini, Gianluca D’Errico and Sebastian Verhelst
Applied Thermal Engineering 174 115224 (2020)
https://doi.org/10.1016/j.applthermaleng.2020.115224

Influence of charge density and oxygen concentration on combustion paths, thermal efficiency and emissions in a heavy-duty diesel engine

Yingying Lu, Yiqiang Pei, Binyang Wu and Yize Liu
Advances in Mechanical Engineering 12 (12) (2020)
https://doi.org/10.1177/1687814020984389

Effects of multiple injections on combustion and emissions in a heavy-duty diesel engine at high load and low speed

Yingying Lu and Yize Liu
Advances in Mechanical Engineering 12 (12) (2020)
https://doi.org/10.1177/1687814020984628

Numerical assessment of radiative heat transfer impact on pollutant formation processes in a compression ignition engine

Filip Jurić, Zvonimir Petranović, Milan Vujanović and Neven Duić
Journal of Cleaner Production 275 123087 (2020)
https://doi.org/10.1016/j.jclepro.2020.123087

Effects of injection strategy and combustion chamber modification on a single-cylinder diesel engine

Ramazan Sener, Murat Umut Yangaz and Mehmet Zafer Gul
Fuel 266 117122 (2020)
https://doi.org/10.1016/j.fuel.2020.117122