ogst
Home All issues Volume 74 (2019) Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles, 74 (2019) 7 References
Open Access
Issue
Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles
Volume 74, 2019
Article Number 7
Number of page(s) 9
DOI https://doi.org/10.2516/ogst/2018082
Published online 10 January 2019
  • Baker P.E. (1969) An experimental study of heat flow in steam flooding. SPE J. 9, 89–99. [Google Scholar]
  • Bulter R.M. (1991) Thermal recovery of oil and bitumen, 1st edn., Prentice Hall, New Jersey. [Google Scholar]
  • Carslaw H.S., Jaeger J.C. (1986) Conduction of heat in solids, 2nd edn., Oxford University Press, USA, New York. [Google Scholar]
  • Chen Y.M. (1996) Steam injection and thermal production, 1st edn., China University of Petroleum Press, Dongying. [Google Scholar]
  • Du D., Hou J.G., Shi Y.L., Liu R. (2012) Calculation model of heat efficiency of steam flooding in multilayer heavy-oil reservoir based on heat interaction, J. China Univ. Petrol. 36, 2, 141–145. [Google Scholar]
  • Fan Z., He C., Xu A. (2016) Calculation model for on-way parameters of horizontal wellbore in the superheated steam injection, Pet. Explor. Develop. 43, 5, 733–739. [Google Scholar]
  • Gina V.R., Hugo B. (2011) Steam injection experiences in heavy and extra-heavy oil fields, Venezuela. Proceedings of Heavy Oil Conference and Exhibition, SPE, Kuwait. [Google Scholar]
  • Gu H., Cheng L., Huang S., Du B., Hu C. (2014) Prediction of thermophysical properties of saturated steam and wellbore heat losses in concentric dual-tubing steam injection wells, Energy 75, 419–429. [CrossRef] [Google Scholar]
  • Gu H., Cheng L., Huang S., Li B., Fang W., Hu C. (2015) Steam injection for heavy oil recovery: modeling of wellbore heat efficiency and analysis of steam injection performance, Energy Convers. Manage. 97, 166–177. [CrossRef] [Google Scholar]
  • Guan Q. (2011) Research and experiment on the shallow thin layer super heavy oil superheated steam drive development-take Louzi 27 well area as example, Petrol. Geol. Eng. 25, 2, 76–78. [Google Scholar]
  • He C., Mu L., Xu A., Fang S. (2015) A new model of steam soaking heating radius and productivity prediction for heavy oil reservoirs, Acta Petrol. Sin. 3612, 1564–1570. [Google Scholar]
  • He C., Mu L., Fan Z., Xu A., Zeng B., Ji Z., Han H. (2017a) An improved steam injection model with the consideration of steam override, Oil Gas Sci. Technol. - Rev. IFP Energies nouvelles 72, 6. https://doi.org/10.2516/ogst/2016026. [CrossRef] [Google Scholar]
  • He C., Xu A., Fan Z., Zeng B., Ji Z. (2017b) New calculation model of the heated radius for the superheated steam injection in heavy oil reservoirs, Pet. Geol. Oilfield Develop. Daqing 36, 2, 117–122. [Google Scholar]
  • He C., Xu A., Fan Z., Zhao L., Bo B. (2018a) A new mathematical model for heat radius of cyclic superheated steam stimulation with horizontal wellbore, Math. Probl. Eng. 2018, 7601702. https://doi.org/10.1155/2018/7601702. [Google Scholar]
  • He C., Xu A., Fan Z., Zhao L., Cheng Y., Bo B., Luo E. (2018b) Advanced mathematical model for reservoir heat efficiency with liquid in steam-injection wellbore, Energy Sourc. A, Recovery util. Environ. Effects 41, 65–67. https://doi.org/10.1080/15567036.2018.1496196. [Google Scholar]
  • Holst P.H., Flock D.L. (1966) Wellbore behavior during saturated steam injection, J. Can Pet. Tech. 5, 184–193. [CrossRef] [Google Scholar]
  • Lai L., Pan T., Hu W., Song X., Ran Q. (2014) A calculation model for thermal efficiency based on steam overlap in heavy oil steam flooding, J. Chongqing Univ. 37, 5, 90–97. [Google Scholar]
  • Li C., Yang B. (2003) Non-isothermal productivity predicting model of heavy crude oil exploited with huff and puff, Oil Drill. Prod. Technol. 25, 5, 89–90. [Google Scholar]
  • Li C., Qian G., Wu S., Yu K., Yang Y. (2008) Superheated steam quality and its application to heavy oil reservoir development by steam stimulation-an example from upsalt heavy oil reservoir in Kenjiyake field, Xinjiang Petrol. Geol. 29, 4, 495–497. [Google Scholar]
  • Li X., Huang Z., Fei Y. (2012) Production limit and injector-producer parameter optimization of superheated steam soaks, Journal of Oil and Gas Technology 34, 6, 148–151. [Google Scholar]
  • Liu C., Cheng L., Liu Y., Pang Z. (2008a) Calculating models for heating radius of cyclic steam stimulation and formation parameters in horizontal well after soaking, Acta Petrol. Sin. 29, 1, 101–105. [Google Scholar]
  • Liu H., Fan Y., Zhao D., Zhang Y. (2008b) Principles and methods of thermal oil recovery technology, 1st edn., China University of Petroleum Press, Dongying. [Google Scholar]
  • Liu W. (1997) Steam injection for thermal recovery of heavy oils, 1st edn., Petroleum industry press, Beijing. [Google Scholar]
  • Marx J.W., Langenheim R.H. (1959) Reservoir heating by hot fluid injection petroleum transactions. AIME 216, 312–315. [Google Scholar]
  • Miura K., Wang J. (2010) An analytical model to predict Cumulative Steam Oil Ratio (CSOR) in thermal recovery SAGD process. Proceedings of Canadian Unconventional Resources and International Petroleum Conference, Galgary, Alberta, Canada, SPE-137604-MS. [Google Scholar]
  • Ni X., Cheng L. (2005) Calculating models for heating area of horizontal wellbore in steam stimulation, Pet. Explor. Develop. 32, 5, 108–112. [Google Scholar]
  • Ramey H.J. (1962) Wellbore heat transmission, J. Petrol. Technol. 427–435. [CrossRef] [Google Scholar]
  • Roger M.B. (1991) Thermal recovery of oil and bitumen, Prentice-Hall Inc, USA. [Google Scholar]
  • Satter A. (1965) Heat losses during flow of steam down a wellbore, J. Petrol. Tech. 17, 845–851. [CrossRef] [Google Scholar]
  • Shie W.R., Todd M.D. (1980) A method for predicting oil recovery by steamflooding including the effects of distillation and gravity override, SPE J. 20, 7547. [Google Scholar]
  • Tewari R.D., Adballa F., Lutfi H.G., Yu K., et al. (2011), Successful cyclic steam stimulation pilot in heavy oilfield of Sudan, Proceedings of SPE Enhanced Oil Recovery Conference, Kuala Lumpur, Malaysia, SPE-144638. [Google Scholar]
  • Van Lookeren J. (1977) Calculation methods for linear and radial steam flow in oil reservoirs. SPE J. 23, 1–16. [Google Scholar]
  • Wei S., Cheng L., Huang W., Huang S. (2014) Prediction for steam chamber development and production performance in SAGD process, J. Natural Gas Sci. Eng. 19, 303–310. [CrossRef] [Google Scholar]
  • Wu R.S., Kry P.R. (1993) Conformance Evolution during cyclic steam stimulation in cold lake reservoir, Proceedings of International Thermal Operations Symposium, Bakersfield, California, SPE 25795. [Google Scholar]
  • Wu X., Xu A., Fan H. (2010) An integrated evaluation on factors affecting the performance of superheated steam huff and puff in heavy oil reservoirs, Pet. Explor. Develop. 37, 5, 608–613. [CrossRef] [Google Scholar]
  • Wu Z., Pang Z., Liu H., Wang D., Wang C.L., Wang C.J., Ye Z., Chen Y. (2015) A visible experiment on adoption of high-temperature gel for improving the development effect of steam flooding in heavy oil reservoirs, Acta Petrol. Sin. 36, 11, 1421–1426. [Google Scholar]
  • Xu A., Mu L., Fan Z., Wu X., Zhao L., Bo B., Xu T. (2013) Mechanism of heavy oil recovery by cyclic superheated steam stimulation, J. Petrol. Sci. Eng. 197–207. [CrossRef] [Google Scholar]
  • Xu A., Wu X., Fan Z., Li S. (2009) A comprehensive wellbore steam flow model for superheat steam injection, J. Daqing Petrol. Inst. 33, 1, 29–35. [Google Scholar]
  • Yu G., Zhang W. (2016) Evaluating method of the reservoir thermal efficiency considering the incomplete perforation, Petrol. Geol. Oilfield Develop. Daqing 35, 1, 80–85. [Google Scholar]
  • Yu L. (2001) Distribution of world heavy oil reservoirs and its recovery technologies and future, Spec. Oil Gas Reserv. 8, 2, 98–103. [Google Scholar]
  • Zhou T., Cheng L., He C., Pang Z., Zhou F. (2010) Calculation model of on-way parameters and heating radius in the superheated steam injection wellbore, Pet. Explor. Develop. 37, 1, 83–88. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.