Open Access
Oil & Gas Science and Technology - Rev. IFP Energies nouvelles
Volume 73, 2018
Article Number 46
Number of page(s) 11
Published online 24 October 2018
  • Afidick D., Kaczorowski N.J., Bette S. (1994) Production performance of a retrograde gas reservoir: a case study of the Arun Field, SPE Asia Pacific Oil and Gas Conference, Melbourne, Australia. [Google Scholar]
  • El-Banbi A., McCain W.D., Semmelbeck M.E. (2000) Investigation of well productivity in gas-condensate reservoirs, SPE/CERI Gas Technology Symposium, Calgary, Canada. [Google Scholar]
  • Garzon F.O., Al-Anazi H.A., Leal J.A., Al-Faifi M.G. (2006) Laboratory and field trial result of condensate banking removal in retrograde gas reservoirs: case history, SPE Annual Technical Conference & Exhibition, San Antonio, USA. [Google Scholar]
  • Al-Anazi H.A., Walker J.G., Pope G.A., Sharma M.M., Hackney D.F. (2005) A successful methanol treatment in gas-condensate reservoir: field application, SPE Prod. Facil. J. 20, 60–68. [CrossRef] [Google Scholar]
  • Li K., Firoozabadi A. (2000) Experimental study of wettability alteration to preferential gas-wetting in porous media and its effects, SPE Reserv. Evalu. Eng. 3, 139–149. [CrossRef] [Google Scholar]
  • Tang G.Q., Firoozabadi A. (2002) Relative permeability modification in gas/liquid systems through wettability alteration to intermediate gas wetting, SPE Reserv. Evalu. Eng. 5, 427–436. [CrossRef] [Google Scholar]
  • Tang G.Q., Firoozabadi A. (2003) Wettability alteration to intermediate gas-wetting in porous media at elevated temperatures, Transp. Porous Media 52, 185–211. [CrossRef] [Google Scholar]
  • Fahes M., Firoozabadi A. (2007) Wettability alteration to intermediate gas-wetting in gas condensate reservoirs at high temperatures, SPE J. 12, 397–407. [CrossRef] [Google Scholar]
  • Noh M., Firoozabadi A. (2008) Wettability alteration in gas-condensate reservoirs to mitigate well deliverability loss by water blocking, SPE Reserv. Evalu. Eng. 11, 676–685. [CrossRef] [Google Scholar]
  • Kumar V., Bang V., Pope G.A., Sharma M.M., Ayyalasomayajula P.S., Kamath J. (2006) Chemical stimulation of gas/condensate reservoirs, SPE Annual Technical Conference & Exhibition, San Antonio, USA. [Google Scholar]
  • Kumar V., Pope G.A., Sharma M.M. (2006) Improving the gas and condensate relative permeability using chemical treatment, SPE Gas Technology Symposium, Calgary, Canada. [Google Scholar]
  • Xie X., Liu Y., Sharma M., Weiss W.W. (2009) Wettability alteration to increase deliverability of gas production wells, J. Nat. Gas Sci. Eng. 1, 39–45. [CrossRef] [Google Scholar]
  • Li K., Liu Y., Zheng H., Huang G., Li G. (2011) Enhanced gas-condensate production by wettability alteration to gas wetness, J. Petrol. Sci. Eng. 78, 505–509. [CrossRef] [Google Scholar]
  • Feng C., Kong Y., Jiang G., Yang J., Pu C., Zhang Y. (2012) Wettability modification of rock cores by fluorinated copolymer emulsion for the enhancement of gas and oil recovery, Appl. Surf. Sci. 258, 7075–7081. [CrossRef] [Google Scholar]
  • Sharifzadeh S., Hassanajili S., Rahimpour M.R. (2012) Wettability alteration of gas condensate reservoir rocks to gas wetness by sol-gel process using fluoroalkylsilane, J. Appl. Polym. Sci. 128, 4077–4085. [CrossRef] [Google Scholar]
  • Mousavi M., Hassanajili S., Rahimpour M.R. (2013) Synthesis of fluorinated nano-silica and its application in wettability alteration near-wellbore region in gas condensate reservoirs, Appl. Surf. Sci. 273, 205–214. [CrossRef] [Google Scholar]
  • Aminnaji M., Fazeli H., Bahramian A., Gerami S., Ghojavand H. (2015) Wettability alteration of reservoir rocks from liquid wetting to gas wetting using nanofluid, Transp. Porous Media 109, 201–206. [CrossRef] [Google Scholar]
  • Esmaeilzadeh P., Sadeghi M.T., Fakhroueian Z., Bahramian A., Norouzbeigi R. (2015) Wettability alteration of carbonate rocks from liquid-wetting to ultra gas-wetting using TiO2, SiO2 and CNT nanofluids containing fluorochemicals, for enhanced gas recovery, J. Nat. Gas Sci. Eng. 26, 1294–1305. [CrossRef] [Google Scholar]
  • Hwang Y., Lee J., Lee J., Jeong Y., Cheong S., Ahn Y., Kim S. (2008) Production and dispersion stability of nanoparticles in nanofluids, Powder Technol. 186, 145–153. [CrossRef] [Google Scholar]
  • Ghadimi A., Saidur R., Metselaar H. (2011) A review of nanofluid stability properties and characterization in stationary conditions, Int. J. Heat Mass Transfer 54, 4051–4068. [CrossRef] [Google Scholar]
  • Yang Y., Oztekin A., Neti S., Mohapatra S. (2012) Particle agglomeration and properties of nanofluids, J. Nanopart. Res. 14, 1–10. [Google Scholar]
  • Lokwani D.B., Rathod P.P., Markana J.H., Shah N.A. (2015) Experimental Investigation on TiO2 Nano Fluid Preparation and its Properties, Int. J. Adv. Res. Eng. Sci. Technol. 2, 2394–2444. [Google Scholar]
  • Muthiah P., Bhushan B., Yun K., Kondo H. (2013) Dual-layered-coated mechanically-durable superomniphobic surfaces with anti-smudge properties, J. Colloid Interface Sci. 409, 227–236. [CrossRef] [Google Scholar]
  • Toth J., Bodi T., Szucs P., Civan F. (2002) Convenient formulae for determination of relative permeability from unsteady-state fluid displacements in core plugs, J. Petrol. Sci. Eng. 36, 33–44. [CrossRef] [Google Scholar]
  • Nosonovsky M., Bhushan B. (2009) Superhydrophobic surfaces and emerging applications: Non-adhesion, energy, green engineering, Curr. Opin. Colloid Interface Sci. 14, 270–280. [CrossRef] [Google Scholar]
  • Hsieh C.T., Wu F.L., Chen W.Y. (2010) Superhydrophobicity and superoleophobicity from hierarchical silica sphere stacking layers, Mater. Chem. Phys. 121, 14–21. [CrossRef] [Google Scholar]
  • Celia E., Darmanin T., Givenchy E.T., Amigoni S., Guittard F. (2013) Recent advances in designing superhydrophobic surfaces, J. Colloid Interface Sci. 402, 1–18. [CrossRef] [Google Scholar]
  • Valipour Motlagh N., Birjandi F.C., Sargolzaei J. (2014) Super-non-wettable surfaces: A review, Colloids Surf. A Physicochem. Eng. Aspects 448, 93–106. [CrossRef] [Google Scholar]
  • Cassie A.B.D., Baxter S. (1994) Wettability of porous surfaces, Trans. Faraday Soc. 40, 546–551. [Google Scholar]
  • Song H.J., Zhang Z.Z., Men X.H. (2008) Superhydrophobic PEEK/PTFE composite coating, Appl. Physics A 91, 73–76. [CrossRef] [Google Scholar]
  • Im M., Im H., Lee J.H., Yoon J.B., Choi Y.K. (2010) A robust superhydrophobic and superoleophobic surface with inverse-trapezoidal microstructures on a large transparent flexible substrate, Soft Matt. 6, 1401–1404. [CrossRef] [Google Scholar]
  • Shibuichi S., Yamamoto T., Onda T., Tsujii K. (1998) Super water- and Oil-repellent surfaces resulting from fractal structure, J. Colloid Interface Sci. 208, 287–294. [CrossRef] [PubMed] [Google Scholar]
  • Xie Q., Xu J., Feng L., Jiang L., Tang W., Luo X., Han C.C. (2004) Facile creation of a super-amphiphobic coating surface with bionic microstructure, Adv. Mat. 16, 302–305. [CrossRef] [Google Scholar]
  • Nishino T., Meguro M., Nakamae K., Matsushita M., Ueda Y. (1999) The lowest surface free energy based on −CF3 alignment, Langmuir 15, 4321–4323. [CrossRef] [Google Scholar]
  • Barthwal S., Kim Y., Lim S.H. (2013) Fabrication of amphiphobic surface by using titanium anodization for large-area three-dimensional substrates, J. Colloid Interface Sci. 400, 123–129. [CrossRef] [Google Scholar]
  • Whitson C.H., Fevang Ø., Yang T. (1999) Gas condensate PVT—what’s really important and why? IBC Conference Optimization of Gas Condensate Fields, England, London. [Google Scholar]
  • Tweheyo M.T., Holt T., Torsæter O. (1999) An experimental study of the relationship between wettability and oil production characteristics, J. Petrol. Sci. Eng. 24, 179–188. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.