Dossier: Second and Third Generation Biofuels: Towards Sustainability and Competitiveness
Open Access
Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles
Volume 68, Number 4, July-August 2013
Dossier: Second and Third Generation Biofuels: Towards Sustainability and Competitiveness
Page(s) 765 - 783
Published online 23 October 2013
  • Daugaard D.E., Brown R.C. (2003) Enthalpy for Pyrolysis for Several Types of Biomass, Energy Fuels 17, 934-939. [CrossRef]
  • Piskorz J., Radlein D., Scott D.S. (1986) On the mechanism of the rapid pyrolysis of cellulose, Journal Analytical Applied Pyrolysis 9, 121-137. [CrossRef]
  • Radlein D., Piskorz J., Scott D.S. (1987) Lignin derived oils from the fast pyrolysis of poplar wood, Journal Analytical Applied Pyrolysis 12, 51-59. [CrossRef]
  • Broido A., Kilzer F.J. (1963) A critique of the present state of knowledge of the mechanism of cellulose pyrolysis, Fire Res. Abstr. Rev. 5, 157.
  • Radlein D., Piskorz J., Scott D.S. (1992) Control of Selectivity in the Fast Pyrolysis of Cellulose, Proc. 6th EC Conference on Biomass for Energy, Industry and Environment, Athens, April 1991, Grassi G., Collina A., Zibetta H. (eds), Elsevier, pp. 643-649.
  • Scott D.S., Paterson L., Piskorz J., Radlein D. (2000) Pretreatment of poplar wood for fast pyrolysis: rate of cation removal, Journal Analytical Applied Pyrolysis 57, 169-176. [CrossRef]
  • Bradbury A.G.W., Sakai Y., Shafizadeh F. (1979) A kinetic model for pyrolysis of cellulose, Journal Applied Polymer Science 23, 3271. [CrossRef]
  • Thurner F., Mann U. (1981) Kinetic Investigation of Wood Pyrolysis, Ind. Eng. Chem. Process Dev. 20, 482-488. [CrossRef]
  • Prakash N., Karunanithi T. (2008) Kinetic Modeling in Biomass Pyrolysis — A Review, Journal Applied Sciences Research 4, (12), 1627-1636.
  • Lede J., Li H.Z., Villermaux J. (1988) Pyrolysis of Biomass. Evidence for a Fusionlike Phenomenon, ACS Symposium Series, Vol. 376, American Chemical Society, Washington, DC, DOI: 10.1021/bk-1988-0376.ch007.
  • Al-Haddad M., Rendek E., Corriou J.-P., Mauviel G. (2010) Biomass Fast Pyrolysis: Experimental Analysis and Modeling Approach, Energy Fuels 24, (9), 4689-4692. DOI: 10.1021/ef901254g. [CrossRef]
  • Radlein D. (1999) in Fast Pyrolysis of Biomass: A Handbook, Bridgwater A., Czernik S., Diebold J. (eds), CPL Press, Newbury, p. 164.
  • Piskorz J., Majerski P., Radlein D. (1999) in Biomass, A Growth Opportunity in Green Energy and Value-Added Products, Proceedings of the 4th Biomass Conference of the Americas, Overend R.P., Chornet E. (eds), Elsevier Science, Amsterdam, Vol. 2, pp. 1153-1159, ISBN: 0080430198.
  • Teixeira A.R., Mooney K.G., Kruger J.S., Williams C.L., Suszynski W.J., Schmidt L.D., Schmidt D.P., Dauenhauer P.J. (2011) Aerosol generation by reactive boiling ejection of molten cellulose, Energy Environmental Science. DOI: 10.1039/c1ee01876k.
  • Bayerbach R., Meier D. (2009) Characterization of the water-insoluble fraction from fast pyrolysis liquids (pyrolytic lignin). Part IV: Structure elucidation of oligomeric molecules, J. Anal. Appl. Pyrolysis 85, 98-107, doi: 10.1016/j.jaap.2008.10.021. [CrossRef]
  • Solantausta Y., Beckman D., Bridgwater A.V., Diebold J. P., Elliott D.C. (1992) Assessment of liquefaction and pyrolysis systems, Biomass Bioenergy 2, 279-297. [CrossRef]
  • Garrett D.E., Malian G.M. (1979) Pyrolysis process for solid wastes, US Patent 4, 153, 514.
  • Kovac R.J., Gorton C.W., Knight J.A., Newman C.J., O’Neil D.J. (1991) Research on the pyrolysis of hardwood in an entrained bed process development unit, DOI: 10.2172/5086913.
  • Maniatis K., Baeyens J., Peeters H., Roggeman G. (1993) The Egemin flash pyrolysis process: commissioning and results, in Advances in thermochemical biomass conversion, Bridgwater A.V. (ed.), Blackie, pp. 1257-1264.
  • Scott D.S., Piskorz J. (1984) The Continuous Flash Pyrolysis of Biomass, Canadian Journal Chemical Engineering 62, 404-412. [CrossRef]
  • Scott D.S., Piskorz J. (1982) The Flash Pyrolysis of Aspen- Poplar Wood, Canadian Journal Chemical Engineering 60, 666-674. [CrossRef]
  • Andres Matas (1998) Union Electrica Fenosa, PyNE issue 6, Sept., pp. 8-9.
  • Scott D.S., Majerski P., Piskorz J., Radlein D. (1999) A second look at fast pyrolysis of biomass — the RTI process, Journal Analytical Applied Pyrolysis 51, 23-37. [CrossRef]
  • Liden G. (1985) Predicted effect of residence time on bio-oil yields for fluid bed pyrolysis, MASc Thesis, Chemical Engineering, University of Waterloo.
  • Piskorz J., Majerski P., Radlein D. (1998) Energy efficient liquefaction of biomaterials by thermolysis, US Patent 5, 853, 548.
  • Hodge F.E. (1953) Dehydrated Foods - Chemistry of Browning Reactions in Model Systems, Agricultural Food Chemistry 1, 15, Oct. 14.
  • Solantausta Y., Oasmaa A., Sipild K., Lindfors C., Lehto J., Autio J., Jokela P., Alin J., Heiskanen J. (2012) Bio-oil Production from Biomass: Steps toward Demonstration, Energy Fuels 26, (1), 233-240, [DOI: 10.1021/ef201109t]. [CrossRef]
  • Diebold J., Scahill J. (1988) Production of Primary Pyrolysis Oils in a Vortex Reactor, in Pyrolysis Oils from Biomass, Chapt. 4, pp. 31-40, ACS Symposium Series, Volume 376, DOI: 10.1021/bk-1988-0376.ch004.
  • Van Rossum G., Güell B.M., Ramachandran R.P.B., Seshan K., Lefferts L., Van Swaaij W.P.M., Kersten S.R. A. (2010) Evaporation of pyrolysis oil: Product distribution and residue char analysis, AIChE J. 56, 2200-2210. DOI: 10.1002/aic.12126.
  • Meier D., Klaubert H., Scholl S. (2008) Method and device for the pyrolysis of biomass, US Patent 7, 438, 785.
  • Meier D., Scholl S., Klaubert H., Markgraf J. (2007) Practical Results from Pytec’s Biomass To Oil (BTO) Process with Ablative Pyrolyser and Diesel CHP Plant, in Bridgwater A.V. (ed.), Bio”euro” - success and visions for bioenergy, CPL Scientific Publishing Service Ltd., ISBN 978-1-872691-28-2.
  • US Patent 7,438,785 (2008).
  • Venderbosch R.H., Prins W. (2010) Fast pyrolysis technology development, Biofuels Bioprod. Bioref. 4, 178-208. DOI: 10.1002/bbb. [CrossRef]
  • Brown J.N., Brown R.C. (2012) Process optimization of an auger pyrolyzer with heat carrier using response surface methodology, Bioresource Technology 103, 405-414. doi: 10.1016/j.biortech.2011.09.117. [CrossRef] [PubMed]
  • Ingram L., Mohan D., Bricka M., Steele P., Strobel D., Crocker D., Mitchell B., Mohammad J., Cantrell K., Pittman, Jr C.U. (2008) Pyrolysis of Wood and Bark in an Auger Reactor: Physical Properties and Chemical Analysis of the Produced Bio-oils, Energy Fuels 22, 614-625. [CrossRef]
  • Badger P.C., Fransham P. (2006) Use of mobile fast pyrolysis plants to densify biomass and reduce biomass handling costs – a preliminary assessment, Biomass Bioenergy 30, 321-325. [CrossRef]
  • Dahmen N., Henrich E., Dinjus E., Weirich F. (2012) The bioliq® bioslurry gasification process for the production of biosynfuels, organic chemicals, and energy, Energy Sustainability Society 2, 3. doi: 10.1186/2192-0567-2-3. [CrossRef]
  •, or at:
  • Scahill J., Putsche V., Ringer M. (2006) Large-Scale Pyrolysis Oil Production: A Technology Assessment and Economic Analysis, United States. Dept. of Energy, doi: 10.2172/894989.
  • Shihadeh A. (1998) Rural Electrification from Local Resources: Biomass Pyrolysis Oil Combustion in a Direct Injection Diesel Engine, PhD Thesis, MIT, available at:
  • Solantausta Y., Oasmaa A., Sipild K., Lindfors C., Lehto J., Autio J., Jokela P., Alin J., Heiskanen J. (2012) Bio-oil Production from Biomass: Steps toward Demonstration, Energy Fuels 26, 233-240. DOI: 10.1021/ef201109t. [CrossRef]
  • Butler E., Devlin G., Meier D., McDonnell K. (2011) A review of recent laboratory research and commercial developments in fast pyrolysis and upgrading, Renewable Sustainable Energy Reviews 15, 4171-4186. doi: 10.1016/j.rser.2011.07.035. [CrossRef]
  • Mohan D., Pittman Jr C.U., Steele P.H. (2006) Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review, Energy Fuels 20, 848-889. doi:10.1021/ef0502397. [CrossRef]
  • Granatstein D., Kruger C., Collins H.P., Garcia-Perez M., Yoder J. (2009) Use of biochar from the pyrolysis of waste organic material as a soil amendment. Center for Sustaining Agric. Nat. Res. Washington State University, Wenatchee, WA. WSDA Interagency Agreement. C0800248,
  • Weisz P.B., Haag W.O., Rodewald P.G. (1979) Catalytic Production of High-Grade Fuel (Gasoline) from Biomass Compounds by Shape-Selective Catalysis, Science, 5 Oct., pp. 57-58, DOI:10.1126/science.206.4414.57.
  • Frankiewicz T.C. (1981) Process for converting oxygenated hydrocarbons into hydrocarbons, US Patent 4308411.
  • Diebold J., Scahill J. (1988) Biomass to Gasoline, in Pyrolysis Oils from Biomass, Soltes J., Milne T.A. (eds), ACS Symposium Series; American Chemical Society, Vol. 376; Washington, DC; DOI: 10.1021/bk-1988-0376.fw001
  • = 11 {&}t = Technology.
  • Radlein D.St.A.G., Mason S.L., Piskorz J., Scott D.S. (1991) Hydrocarbons from the Catalytic Pyrolysis of Biomass, Energy Fuels 5, 760-763. [CrossRef]
  • Marker T.L., Felix L.G., Linck M.B., Roberts M.J. (2012) [Tcbiomass2011] integrated hydropyrolysis and hydroconversion (IH2) for the direct production of gasoline and Diesel fuels or blending components from biomass, Part 1: Proof of principle testing, Environmental Progress Sustainable Energy 31, 191-199. DOI: 10.1002/ep.10629. [CrossRef]
  • Elliott D.C. (2007) Historical Developments in Hydroprocessing BioOils, Energy Fuels 21, 1792-1815. DOI: 10.1021/ef070044u. [CrossRef]
  • Xiu S., Shahbazi A. (2012) Bio-oil production and upgrading research: A review, Renewable Sustainable Energy Reviews 16, 4406-4414. [CrossRef]
  • De Miguel Mercader F., Groeneveld M.J., Kersten S.R.A., Way N.W.J., Schaverien C.J., Hogendoorn J.A. (2010) Production of advanced biofuels: Co-processing of upgraded pyrolysis oil in standard refinery units, Applied Catalysis B: Environmental 96, 57-66. [CrossRef]
  • = 18.

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.