Dossier: R&D for Cleaner and Fuel Efficient Engines and Vehicles
Open Access
Issue
Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles
Volume 66, Number 5, September-October 2011
Dossier: R&D for Cleaner and Fuel Efficient Engines and Vehicles
Page(s) 855 - 875
DOI https://doi.org/10.2516/ogst/2011136
Published online 25 November 2011
  • Pidol L., Lecointe L., Jeuland N. (2009) Ethanol as a diesel base fuel: Managing the flash point issue - consequences on engine behavior, SAE Technical paper 2009-01-1807.
  • Rose K.D., Jansen L., Hall D., Clark R., Zemroch P.J., Cardenas Almena M.D., Higham C., Elliott N., Fontaras G., Kalogirou M., Samaras Z. (2010) Impact of Biodiesel Blends on Fuel Consumption and Emissions in Euro 4 Compliant Vehicles, SAE Technical paper 2010-01-1484.
  • Castagné M., Bentolila Y., Chaudoye F., Hallé A., Nicolas F., Sinoquet D. (2008) Comparison of engine calibration methods based on DoE, Oil Gas Sci. Technol. 63, 4, 563-582. [CrossRef] [EDP Sciences]
  • Seabrook J., Cornwell R., Mortimer P., Edwards S. (2007) A Calibration Methodology to Ensure Low Variation in Emissions between Engines in Production, 4th IAV conference - DOE in Engine Development - Design of experiments, Berlin, Germany.
  • Hafner M., Isermann R. (2001) The use of stationary and dynamic emission models for an improved engine performance in legal test cycles, International workshop on Modeling, Emissions and Control in automotive engines, Salerno, Italy.
  • Nelles O. (2001) Non linear system identification, Springer-Verlag.
  • Chaudoye F., Castagné M., Sinoquet D., Wahl F. (2009) Modelling engine operating space for DoE calibration methods, 5th IAV conference: Design of Experiments (DoE) in Engine Development, Berlin Germany, June 29-30.
  • Santner T.J., Williams B.J., Notz W.I. (2003) The design and analysis of computer experiments, Springer series in statistics (July 2003).
  • Beatrice C., Guido C., Di Iorio S., Napolitano P., Del Giacomo N. (2010) Impact of RME and GTL Fuel on Combustion and Emissions of a “Torque-Controlled” Diesel Automotive Engines, SAE Technical paper 2010-01-1477.
  • Hansen A.C., Zhang Q., Lyne P.W.L. (2005) Ethanol-diesel fuel blends-a review, Bioresour. Technol. 96, 277-285. [CrossRef] [PubMed]
  • Cui X., Helmantel A., Golovichev V., Denbratt I. (2009) Combustion and Emissions in a Light Duty Diesel Engine Using Diesel-Water Emulsion and Diesel-Ethanol Blends, SAE Technical paper 2009-01-2695.
  • Shudo T., Nakajima T., Hiraga K. (2009) Simultaneous reduction in cloud point, smoke, and NOx emissions by blending bioethanol into biodiesel fuels and exhaust gas recirculation, Int. J. Engine Res. 10, 15-26. [CrossRef]
  • Chen H., Wang J., Shuai S., Wenmiao C. (2008) Study of oxygenated biomass fuel blends on a diesel engine, Fuel 87, 3462-3468. [CrossRef]
  • Kaas M.D., Thomas J.F., Storey J.M., Domingo N., Wade J., Kenreck G. (2001) Emissions from a 5.9 liter Diesel Engine Fueled with Ethanol Diesel Engines, SAE Technical paper 2001-01-2018.
  • Kim H., Choï B. (2008) Effect of ethanol–diesel blend fuels on emission and particle size distribution in a common-rail direct injection diesel engine with warm-up catalytic converter, Renew. Energy 33, 2222-2228. [CrossRef]
  • Magand S., Lecointe B., Chaudoye F., Castagné M. (2010) Optimization of a Euro 5 Vehicle Powered by an Ethanol Based Diesel Fuel, SAE Technical paper 2010-01-1520.
  • Yan Y., Yu-Sheng Z., Si-Ping R., Rui Z., Dong-Dong W. (2009) Study on Combustion and Emission Characteristics of Diesel Engines Fueled with Ethanol/Diesel Blended Fuel, SAE Technical paper 2009-01-2675.
  • Kumar C., Athawe M., Aghav Y.V., Gajendra Babu M.K., Das L.M. (2007) Effects of Ethanol Addition on Performance Emission and Combustion of DI Diesel Engine Running at Different Injection Pressures, SAE Technical paper 2007-01- 0626.
  • Mohammadi A., Kee S.-S., Ishiyama T., Kakuta T., Matsumuto T. (2005) Implementation of Ethanol Diesel Blend Fuels in PCCI Combustion, SAE Technical paper 2005-01-3712.
  • Chaudoye F., Castagné M., Lecointe B., Magand S. (2010) Advanced calibration methods applied with an innovative ethanol/Diesel fuel formulation, International Conference and Exhibition DIESEL ENGINES: Facing the competitiveness challenges, Rouen, France, May 26-27.
  • Chen H., Shuai S.-J., Wang J.-X. (2007) Study on combustion characteristics and PM emissions of diesel engines using esterethanol- diesel blended fuels, Proc. Combust. Inst. 31, 2981-2989. [CrossRef]
  • EUCAR / JRC / CONCAWE (2010) Well-to-wheels analysis of future automotive fuels and power-trains in the European context. Well-to-Wheels report, http://ies.jrc.ec.europa.eu/WTW, January 2010.

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.