Open Access
Issue
Oil & Gas Science and Technology - Rev. IFP
Volume 63, Number 2, March-April 2008
Page(s) 251 - 261
DOI https://doi.org/10.2516/ogst:2007076
Published online 14 December 2007
  • Horlock J.H. (2003) Advanced gas turbine cycles, Pergamon Press, Oxford edition.
  • Potter P.J. (1976) Power plant theory and design, 2nd edition of steam power plant, John Wiley & sons, New York, Chichester, Brisbane, Toronto.
  • El-Wakil M.M. (1985) Power plant technology, International student edition, 1st printing.
  • Paepe M.D.,Dick E. (2000) Cycle improvements to steam gas turbines, Int. J. Energ. Res. 24, 1081-1107. [CrossRef]
  • Haselbacher H. (2005) Performance of water/steam injected gas turbine power plants consisting of standard gas turbines and turbo expanders, Int. J. Energ. Technol. Policy 3, 1, 2. [CrossRef]
  • Cheng D.Y., Nelson A.L.C. (2002) The chronological development of the change cycle steam injected gas turbine during the past 25 years, Proceedings of ASME Turbo Expo.
  • Traverso A.,Massardo A.F. (2002) Thermo-economic analysis of mixed gas-steam cycles, Appl. Therm. Eng. 22, 1-21. [CrossRef]
  • Fraize W.E.,Kinney C. (1979) Effects of steam injection on the performance of gas-turbine power cycles, ASME J. Eng. Power 101, 217-227. [CrossRef]
  • Brown D.H.,Cohn A. (1981) An evaluation of steam-injected combustion turbine systems, ASME J. Eng. Power 103, 13-19. [CrossRef]
  • Larson E.D.,Williams R.H. (1987) Steam-injected gas-turbines, ASME J. Eng. Gas-Turbines Power 109, 55-63. [CrossRef]
  • Macchi E.,Consonni S.,Lozza G.,Chiesa P. (1995) An assessment of the thermodynamic performance of mixed gas-steam cycles: Part A – Intercooled and steam-injected cycles, ASME J. Eng. Gas-Turbines Power 117, 489-498. [CrossRef]
  • Rice I.G. (1995) Steam-injected gas-turbine analysis: steam rates, ASME J. Eng. Gas-Turbines Power 117, 347-353. [CrossRef]
  • Nishida K.,Takagi T.,Kinoshita S. (2005) Regenerative steaminjection gas-turbine systems, Appl. Energ. 81, 231-246. [CrossRef]
  • Heppenstall T. (1998) Advanced gas turbine cycles for power generation: a critical review, Appl. Therm. Eng. 18, 837-846. [CrossRef]
  • Ohno Y., Zhao D., Furuhata T., Yamashita H., Arai N., Hisazumi Y. (2001) Combustion characteristics and NOx formation of a gas turbine system with steam injection and two-stage combustion, Proceedings of 2000 International Joint Power Generation Conference & Exposition, Miami Beach, Florida, July 23-26, ASME paper IJPGC 2000-15046.
  • Moore M.J. (1997) Nox emission control in gas turbines for combined cycle gas turbine plant, Proc. Instn Mech Engrs 211 Part-A Imeche.
  • Zhao D.,Ohno Y.,Furuhata T.,Yamashita H.,Arai N.,Hisazumi Y. (2001) Combustion technology in a novel gas turbine system with steam injection and two-stage combustion, J. Chem. Eng. Jpn 34, 9, 1159-1164. [CrossRef]
  • Milancej M. (2005) Advanced Gas Turbine Cycles: Thermodynamic Study on the Concept of Intercooled Compression Process, Diploma Thesis, Institut für Thermodynamik und Energie wandlung Technische Universität Wien Vienna.
  • Feidt M.,Costea M.,Postelnicu V. (2006) Comparaison entre le cycle simple de Brayton avec apport thermique imposé et avec contrainte de température maximale, Oil Gas Sci. Technol. 61, 2, 237-245. [CrossRef] [EDP Sciences]
  • Guillet R. (2006) Du diagramme hydrométrique de combustion aux pompes à vapeur d'eau. Livre sur un nouveau regard sur la combustion et ses applications énergétiques, Elsevier, Science Ltd.
  • Kling R. (1980) Thermodynamique générale et applications, Editions Technip, Paris.
  • Keenan J.H., Chao J., Kaye J. (1979) Gas tables thermodynamic properties of air products of combustion and component gases compressible flow functions, 2nd ed., John Wiley, New York.
  • Cloyd S.T., Harris A.J. (1995) Gas turbine performance – New application and test correction curves, ASME paper 95-GT-167.
  • Porchakov B.P., Aïssani S., Mikaelian E. (1981) Essais d'une turbine à gaz avec variations de pertes de charge locales à la sortie, Rev. Générale Thermique, France231.
  • Sonntag R.E., Borgnakke C., VanWylen G.J. (1998) Fundamentals of Engineering thermodynamics, 5th ed., John Wiley and sons, New York.
  • Goldammer H.D. (1984) Computes thermophysical Properties of water/steam, based on rational formulation for the free energy F = U - T*S (Helmholtz-Function), Program written and developed by Horet D., Goldammer B.T.W.B., Last Update 30. 04. 1984, Schwaebisch Gmuend, Germany.
  • International Association for the Properties of Water and Steam (1997) Release on the IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam, Erlangen, Germany.
  • Jebaraj S., Iniyan S. (2004) A review of energy models, Renew. Sust. Energ. Rev.1-31.
  • Mathioudakis K. (2002) Evaluation of steam and water injection effects on gas turbine operation using explicit analytical relations, Proc Instn Mech Engrs 216Part A: J. Power Energ.
  • Poullikkas A. (2005) An overview of current and future sustainable gas turbine technologies, Renew. Sust. Energ. Rev. 9, 409-443. [CrossRef]
  • Boissenin Y., Moliere M., Remy P. (1994) Les atouts de la turbine à gaz MS6001 B en cogénération – exemple de l'usine d'électricité de Metz, Rev. Technique Gec. Alsthom 15.

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.