Article cité par

La fonctionnalité Article cité par… liste les citations d'un article. Ces citations proviennent de la base de données des articles de EDP Sciences, ainsi que des bases de données d'autres éditeurs participant au programme strong>CrossRef Cited-by Linking Program. Vous pouvez définir une alerte courriel pour être prévenu de la parution d'un nouvel article citant " cet article (voir sur la page du résumé de l'article le menu à droite).

Article cité :

Citations de cet article :

A new methodology for uncertainties characterization in combustion diagnosis and thermodynamic modelling

Jesús Benajes, Pablo Olmeda, Jaime Martín and Ricardo Carreño
Applied Thermal Engineering 71 (1) 389 (2014)
DOI: 10.1016/j.applthermaleng.2014.07.010
Voir cet article

Evaluation of Nonlinear Estimation Methods for Calibration of a Heat-Release Model

Gabriel Ingesson, Lianhao Yin, Rolf Johansson and Per Tunestal
SAE International Journal of Engines 9 (2) 1191 (2016)
DOI: 10.4271/2016-01-0820
Voir cet article

The effects of biomass syngas composition, moisture, tar loading and operating conditions on the combustion of a tar-tolerant HCCI (Homogeneous Charge Compression Ignition) engine

S. Bhaduri, F. Contino, H. Jeanmart and E. Breuer
Energy 87 289 (2015)
DOI: 10.1016/j.energy.2015.04.076
Voir cet article

Cylinder state estimation from measured cylinder pressure traces - A Survey * *This project was financed by the VINNOVA Industry Excellence Center LINK-SIC.

Lars Eriksson and Andreas Thomasson
IFAC-PapersOnLine 50 (1) 11029 (2017)
DOI: 10.1016/j.ifacol.2017.08.2483
Voir cet article

A New Method for Simultaneous Determination of the TDC Offset and the Pressure Offset in Fired Cylinders of an Internal Combustion Engine

Urban Žvar Baškovič, Rok Vihar, Igor Mele and Tomaž Katrašnik
Energies 10 (1) 143 (2017)
DOI: 10.3390/en10010143
Voir cet article

Study on low temperature heat release of partially premixed combustion in a heavy duty engine for real-time applications

Cheng Fang, Per Tunestal, Lianhao Yin, Fuyuan Yang and Xiaofan Yang
Applied Thermal Engineering 148 219 (2019)
DOI: 10.1016/j.applthermaleng.2018.11.003
Voir cet article

EGR control on operation of a tar tolerant HCCI engine with simulated syngas from biomass

Subir Bhaduri, Hervé Jeanmart and Francesco Contino
Applied Energy 227 159 (2018)
DOI: 10.1016/j.apenergy.2017.08.233
Voir cet article

Nonlinear Estimation of Variables for Heat Release Calculation Using a Gradient Method

Lianhao Yin, Gabriel Turesson, Rolf Johansson and Per Tunestål
Journal of Dynamic Systems, Measurement, and Control 141 (6) 061011 (2019)
DOI: 10.1115/1.4042877
Voir cet article

Reciprocating Engine Combustion Diagnostics

Rakesh Kumar Maurya
Mechanical Engineering Series, Reciprocating Engine Combustion Diagnostics 543 (2019)
DOI: 10.1007/978-3-030-11954-6_10
Voir cet article

Heat Loss Analysis of a Steel Piston and a YSZ Coated Piston in a Heavy-Duty Diesel Engine Using Phosphor Thermometry Measurements

Christian Binder, Fahed Abou Nada, Mattias Richter, Andreas Cronhjort and Daniel Norling
SAE International Journal of Engines 10 (4) 1954 (2017)
DOI: 10.4271/2017-01-1046
Voir cet article

Investigation of Small Pilot Combustion in a Heavy-Duty Diesel Engine

Carlos Jorques Moreno, Ola Stenlaas and Per Tunestal
SAE International Journal of Engines 10 (3) 1193 (2017)
DOI: 10.4271/2017-01-0718
Voir cet article

Cylinder Pressure-Based Virtual Sensor for In-Cycle Pilot Mass Estimation

Carlos Jorques Moreno, Ola Stenlaas and Per Tunestal
SAE International Journal of Engines 11 (6) 1167 (2018)
DOI: 10.4271/2018-01-1163
Voir cet article