Three Dimensional Coupled Simulation of Furnaces and Reactor Tubes for the Thermal Cracking of Hydrocarbons
Rev. Inst. Fr. Pét., 53 2 (1998) 181-194
Publié en ligne : 2006-12-01
Article cité par
La fonctionnalité Article cité par… liste les citations d'un article. Ces citations proviennent de la base de données des articles de EDP Sciences, ainsi que des bases de données d'autres éditeurs participant au programme CrossRef Cited-by Linking Program. Vous pouvez définir une alerte courriel pour être prévenu de la parution d'un nouvel article citant " cet article (voir sur la page du résumé de l'article le menu à droite).
Article cité :
Citations de cet article :
Unsteady-state coupled firebox-reactor modeling of a naphtha pyrolysis furnace considering CO2 emission and coke formation
Somang Shin, Suyeon Lee, Minji Kim, Huiwon Lee and Sang Hwan SonProcess Safety and Environmental Protection 198 107124 (2025)
https://doi.org/10.1016/j.psep.2025.107124
A coupled CFD simulation approach for investigating the pyrolysis process in industrial naphtha thermal cracking furnaces
Mohsen Rezaeimanesh, Ali Asghar Ghoreyshi, S.M. Peyghambarzadeh and Seyed Hassan HashemabadiChinese Journal of Chemical Engineering 44 528 (2022)
https://doi.org/10.1016/j.cjche.2021.03.028
Modeling of a dry low nitrogen oxides burner using a three-dimensional computational fluid dynamics simulation
Guodong Sun, Xuejing Duan, Bo Hao and Afshin DavarpanahProceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 235 (6) 2209 (2021)
https://doi.org/10.1177/09544089211035595
Catalytic Effect of Dimethyl Disulfide on Coke Formation on High-Temperature Alloys: Myth or Reality?
Manjunath Patil, Stamatis A. Sarris, Kim Verbeken, Marie-Françoise Reyniers and Kevin M. Van GeemIndustrial & Engineering Chemistry Research 59 (34) 15165 (2020)
https://doi.org/10.1021/acs.iecr.0c01693
Thermal/catalytic cracking of hydrocarbons for the production of olefins; a state-of-the-art review III: Process modeling and simulation
Mohammad Fakhroleslam and Seyed Mojtaba SadrameliFuel 252 553 (2019)
https://doi.org/10.1016/j.fuel.2019.04.127
Zone method based coupled simulation of industrial steam cracking furnaces
Guihua Hu, Yu Zhang, Wenli Du, Jian Long and Feng QianEnergy 172 1098 (2019)
https://doi.org/10.1016/j.energy.2018.12.190
Effect of Long-Term High Temperature Oxidation on the Coking Behavior of Ni-Cr Superalloys
Stamatis A. Sarris, Manjunath Patil, Kim Verbeken, Marie-Françoise Reyniers and Kevin M. Van GeemMaterials 11 (10) 1899 (2018)
https://doi.org/10.3390/ma11101899
Optimization of the in Situ Pretreatment of High Temperature Ni–Cr Alloys for Ethane Steam Cracking
Stamatis A. Sarris, Natalia Olahova, Kim Verbeken, et al.Industrial & Engineering Chemistry Research 56 (6) 1424 (2017)
https://doi.org/10.1021/acs.iecr.6b04537
Modeling of heat transfer and pyrolysis reactions in ethylene cracking furnace based on 3-D combustion monitoring
Shu Zheng, Xiangyu Zhang, Chaobo Qi and Huaichun ZhouInternational Journal of Thermal Sciences 94 28 (2015)
https://doi.org/10.1016/j.ijthermalsci.2015.02.003
Numerical simulation of the flue gas side of refining vacuum furnace using CFD
Xuegang Li, Luhong Zhang, Yongli Sun, et al.Chemical Engineering Science 123 70 (2015)
https://doi.org/10.1016/j.ces.2014.11.001
Standards for fired heater design: An assessment based on computational modelling
Zdeněk Jegla, Jiří Vondál and Jiří HájekApplied Thermal Engineering 89 1068 (2015)
https://doi.org/10.1016/j.applthermaleng.2015.05.012
Impact of Radiation Models in Coupled Simulations of Steam Cracking Furnaces and Reactors
Guihua Hu, Carl M. Schietekat, Yu Zhang, et al.Industrial & Engineering Chemistry Research 54 (9) 2453 (2015)
https://doi.org/10.1021/ie5042337
Swirl flow tube reactor technology: An experimental and computational fluid dynamics study
Carl M. Schietekat, Marco W.M. van Goethem, Kevin M. Van Geem and Guy B. MarinChemical Engineering Journal 238 56 (2014)
https://doi.org/10.1016/j.cej.2013.08.086
Comprehensive Simulation and Optimization of an Ethylene Dichloride Cracker Based on the One-Dimensional Lobo–Evans Method and Computational Fluid Dynamics
Chaochun Li, Guihua Hu, Weimin Zhong, et al.Industrial & Engineering Chemistry Research 52 (2) 645 (2013)
https://doi.org/10.1021/ie302436r
Coupled simulation of an industrial naphtha cracking furnace equipped with long-flame and radiation burners
Guihua Hu, Honggang Wang, Feng Qian, Kevin M. Van Geem, Carl M. Schietekat and Guy B. MarinComputers & Chemical Engineering 38 24 (2012)
https://doi.org/10.1016/j.compchemeng.2011.11.001
Numerical simulation on flow, combustion and heat transfer of ethylene cracking furnaces
Hu Guihua, Wang Honggang and Qian FengChemical Engineering Science 66 (8) 1600 (2011)
https://doi.org/10.1016/j.ces.2010.12.028
Modelling and dynamic optimization of thermal cracking of propane for ethylene manufacturing
Mehdi Berreni and Meihong WangComputers & Chemical Engineering 35 (12) 2876 (2011)
https://doi.org/10.1016/j.compchemeng.2011.05.010
Comprehensive CFD Simulation of Product Yields and Coking Rates for a Floor- and Wall-Fired Naphtha Cracking Furnace
Guihua Hu, Honggang Wang, Feng Qian, et al.Industrial & Engineering Chemistry Research 50 (24) 13672 (2011)
https://doi.org/10.1021/ie2012642
MATHEMATICAL MODEL FOR REFINERY FURNACES SIMULATION
Fabian A. Díaz Mateus and Jesús A. Castro GualdrónCT&F - Ciencia, Tecnología y Futuro 4 (1) 89 (2010)
https://doi.org/10.29047/01225383.442
Optimal operation of tubular reactors for naphtha cracking by numerical simulation
G.‐Y. Gao, M. Wang, C. Ramshaw, X.‐G. Li and H. YeungAsia-Pacific Journal of Chemical Engineering 4 (6) 885 (2009)
https://doi.org/10.1002/apj.351
Combustion and Pyrolysis Reactions in a Naphtha Cracking Furnace
Y. L. Han, R. Xiao and M. Y. ZhangChemical Engineering & Technology 30 (1) 112 (2007)
https://doi.org/10.1002/ceat.200600191
Simulation of imbalance reduction between two reactors in an ethylene dichloride cracker
Younggeun Park, Byung Seok Choi and Jongheop YiChemical Engineering Science 60 (5) 1237 (2005)
https://doi.org/10.1016/j.ces.2004.09.075
Sustainable Strategies for the Upgrading of Natural Gas: Fundamentals, Challenges, and Opportunities
Domenico Sanfilippo, Ivano Miracca and Marco Di GirolamoNATO Science Series II: Mathematics, Physics and Chemistry, Sustainable Strategies for the Upgrading of Natural Gas: Fundamentals, Challenges, and Opportunities 191 217 (2005)
https://doi.org/10.1007/1-4020-3310-9_11
Calculation of three-dimensional flow and pressure fields in cracking furnaces
A.J.M. Oprins and G.J. HeynderickxChemical Engineering Science 58 (21) 4883 (2003)
https://doi.org/10.1016/j.ces.2002.12.006
Modelling and Simulation of a Top‐Fired Primary Steam Reformer using GPROMS
A.J. Dunn, J. Yustos and I.M. MujtabaDevelopments in Chemical Engineering and Mineral Processing 10 (1-2) 77 (2002)
https://doi.org/10.1002/apj.5500100107
Three-Dimensional Asymmetric Flow and Temperature Fields in Cracking Furnaces
Arno J. M. Oprins, Geraldine J. Heynderickx and Guy B. MarinIndustrial & Engineering Chemistry Research 40 (23) 5087 (2001)
https://doi.org/10.1021/ie0010114
Three‐dimensional flow patterns in cracking furnaces with long‐flame burners
Geraldine J. Heynderickx, Arno J. M. Oprins, Guy B. Marin and Erik DickAIChE Journal 47 (2) 388 (2001)
https://doi.org/10.1002/aic.690470215
Simulation of the Effects of CCl4 on the Ethylene Dichloride Pyrolysis Process
Byung-Seok Choi, Joo Seok Oh, Sang-Wook Lee, Hwayong Kim and Jongheop YiIndustrial & Engineering Chemistry Research 40 (19) 4040 (2001)
https://doi.org/10.1021/ie000836a