Eulerian Simulation of Dense Phase Fluidized Beds
Rev. Inst. Fr. Pét., 51 2 (1996) 301-307
Publié en ligne : 2006-11-01
Article cité par
La fonctionnalité Article cité par… liste les citations d'un article. Ces citations proviennent de la base de données des articles de EDP Sciences, ainsi que des bases de données d'autres éditeurs participant au programme CrossRef Cited-by Linking Program. Vous pouvez définir une alerte courriel pour être prévenu de la parution d'un nouvel article citant " cet article (voir sur la page du résumé de l'article le menu à droite).
Article cité :
Citations de cet article :
Two-fluid Modeling of Geldart A Particles in Gas-solid Bubbling Fluidized Bed: Assessment of Drag Models and Solid Viscosity Correlations
Tian Tian, Zhengrui Jia, Shujun Geng and Xiaoxing LiuInternational Journal of Chemical Reactor Engineering 16 (3) (2018)
https://doi.org/10.1515/ijcre-2017-0016
Assessment of Drag Models for Geldart A Particles in Bubbling Fluidized Beds
Bahareh Estejab and Francine BattagliaJournal of Fluids Engineering 138 (3) (2016)
https://doi.org/10.1115/1.4031490
Two-fluid modeling of Geldart A particles in gas–solid micro-fluidized beds
Xiaoxing Liu, Chuanqiang Zhu, Shujun Geng, et al.Particuology 21 118 (2015)
https://doi.org/10.1016/j.partic.2014.05.012
Computational and experimental investigation of CO2 capture in gas–solid bubbling fluidized bed
Mahdi Ayobi, Shahrokh Shahhosseini and Yaghoub BehjatJournal of the Taiwan Institute of Chemical Engineers 45 (2) 421 (2014)
https://doi.org/10.1016/j.jtice.2013.06.009
Three-dimensional CFD simulation of the system inlet and outlet boundary condition effects inside a high solid particle flux circulating fluidized bed riser
Benjapon Chalermsinsuwan, Yongyoot Prajongkan and Pornpote PiumsomboonPowder Technology 245 80 (2013)
https://doi.org/10.1016/j.powtec.2013.04.026
A New Approach To Specify the Inlet Boundary Conditions for Computational Fluid Dynamics (CFD) Modeling of Hydrodynamic Behavior of a Circulating Fluidized Bed (CFB) Riser
B. Peng, J. Zhu and C. ZhangIndustrial & Engineering Chemistry Research 51 (4) 2152 (2012)
https://doi.org/10.1021/ie200916c
A functional subgrid drift velocity model for filtered drag prediction in dense fluidized bed
Jean‐François Parmentier, Olivier Simonin and Olivier DelsartAIChE Journal 58 (4) 1084 (2012)
https://doi.org/10.1002/aic.12647
Application of the particle in cell approach for the simulation of bubbling fluidized beds of Geldart A particles
Shayan Karimipour and Todd PugsleyPowder Technology 220 63 (2012)
https://doi.org/10.1016/j.powtec.2011.09.026
An EMMS-based multi-fluid model (EFM) for heterogeneous gas–solid riser flows: Part II. An alternative formulation from dominant mechanisms
Junwu Wang, Quan Zhou, Kun Hong, Wei Wang and Jinghai LiChemical Engineering Science 75 349 (2012)
https://doi.org/10.1016/j.ces.2012.03.021
The role of scale resolution versus inter-particle cohesive forces in two-fluid modeling of bubbling fluidization of Geldart A particles
Junwu Wang, M.A. van der Hoef and J.A.M. KuipersChemical Engineering Science 66 (18) 4229 (2011)
https://doi.org/10.1016/j.ces.2011.06.004
Computational Gas-Solids Flows and Reacting Systems
T. Pugsley, S. Karimipour and Z. WangAdvances in Chemical and Materials Engineering, Computational Gas-Solids Flows and Reacting Systems 359 (2011)
https://doi.org/10.4018/978-1-61520-651-3.ch011
EMMS-based Eulerian simulation on the hydrodynamics of a bubbling fluidized bed with FCC particles
Junwu Wang and Yaning LiuPowder Technology 197 (3) 241 (2010)
https://doi.org/10.1016/j.powtec.2009.09.022
Profiles of solid fraction and heterogeneous phase structure in a gas–solid airlift loop reactor
Chaoyu Yan, Chunxi Lu, Yongmin Zhang, Dewu Wang and Mengxi LiuChemical Engineering Science 65 (9) 2707 (2010)
https://doi.org/10.1016/j.ces.2010.01.005
Numerical Study on the Effect of the Air Jets at the Inlet Distributor in the Gas−Solids Circulating Fluidized-Bed Risers
Botao Peng, Jesse Zhu and Chao ZhangIndustrial & Engineering Chemistry Research 49 (11) 5310 (2010)
https://doi.org/10.1021/ie901902j
Experimental and numerical research for fluidization behaviors in a gas–solid acoustic fluidized bed
Changqing Cao, Shuqin Dong, Yanan Zhao and Qingjie GuoAIChE Journal 56 (7) 1726 (2010)
https://doi.org/10.1002/aic.12115
CFD simulation of gas-solid bubbling fluidized bed containing FCC particles
Seyyed Hossein Hosseini, Rahbar Rahimi, Mortaza Zivdar and Abdolreza SamimiKorean Journal of Chemical Engineering 26 (5) 1405 (2009)
https://doi.org/10.1007/s11814-009-0220-9
Why the two-fluid model fails to predict the bed expansion characteristics of Geldart A particles in gas-fluidized beds: A tentative answer
Junwu Wang, M.A. van der Hoef and J.A.M. KuipersChemical Engineering Science 64 (3) 622 (2009)
https://doi.org/10.1016/j.ces.2008.09.028
Two-fluid modeling of Geldart A particles in gas-fluidized beds
Mao Ye, Junwu Wang, M.A. van der Hoef and J.A.M. KuipersParticuology 6 (6) 540 (2008)
https://doi.org/10.1016/j.partic.2008.07.005
Three‐dimensional CFD model of the deaeration rate of FCC particles
Sanjib Das Sharma, Todd Pugsley and Romain DelatourAIChE Journal 52 (7) 2391 (2006)
https://doi.org/10.1002/aic.10858
Simulation of granular flow in a fluid applied to sedimentation
Vincent Komiwes, Philippe Mege, Yves Meimon and Hans HerrmannGranular Matter 8 (1) 41 (2006)
https://doi.org/10.1007/s10035-005-0220-3
Computational Fluid Dynamics
M.A. van der Hoef, M. Ye, M. van Sint Annaland, et al.Advances in Chemical Engineering, Computational Fluid Dynamics 31 65 (2006)
https://doi.org/10.1016/S0065-2377(06)31002-2
Simulation and experimental validation of a freely bubbling bed of FCC catalyst
Tim McKeen and Todd PugsleyPowder Technology 129 (1-3) 139 (2003)
https://doi.org/10.1016/S0032-5910(02)00294-2
Computational Flow Modeling for Chemical Reactor Engineering
Process Systems Engineering, Computational Flow Modeling for Chemical Reactor Engineering 5 367 (2002)https://doi.org/10.1016/S1874-5970(02)80013-3
An extension of the preconditioned advection upstream splitting method for 3D two-phase flow calculations in circulating fluidized beds
Juray De Wilde, Geraldine J. Heynderickx, Jan Vierendeels, Erik Dick and Guy B. MarinComputers & Chemical Engineering 26 (12) 1677 (2002)
https://doi.org/10.1016/S0098-1354(02)00157-6
Using CFD for scaling up gas–solid bubbling fluidised bed reactors with Geldart A powders
R. Krishna and J.M. van BatenChemical Engineering Journal 82 (1-3) 247 (2001)
https://doi.org/10.1016/S1385-8947(00)00369-7
Heat transfer — a review of 1996 literature
E.R.G. Eckert, R.J. Goldstein, W.E. Ibele, et al.International Journal of Heat and Mass Transfer 43 (8) 1273 (2000)
https://doi.org/10.1016/S0017-9310(99)00067-8
Modelling sieve tray hydraulics using computational fluid dynamics
J.M. van Baten and R. KrishnaChemical Engineering Journal 77 (3) 143 (2000)
https://doi.org/10.1016/S1385-8947(99)00164-3
CFD Simulations of Sieve Tray Hydrodynamics
R. Krishna, J.M. Van Baten, J. Ellenberger, A.P. Higler and R. TaylorChemical Engineering Research and Design 77 (7) 639 (1999)
https://doi.org/10.1205/026387699526575
Eulerian simulations of bubbling behaviour in gas-solid fluidised beds
B.G.M. van Wachem, J.C. Schouten, R. Krishna and C.M. van den BleekComputers & Chemical Engineering 22 S299 (1998)
https://doi.org/10.1016/S0098-1354(98)00068-4
Scale effects in fluidized multiphase reactors
R. Krishna, J.M. van Baten and J. EllenbergerPowder Technology 100 (2-3) 137 (1998)
https://doi.org/10.1016/S0032-5910(98)00134-X