Combined Effect of Pressure and Temperature on the Viscous Behaviour of All-Oil Drilling Fluids
Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles, 69 7 (2014) 1283-1296
Published online: 2014-06-03
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Investigating the synergistic effects of coconut coir fiber and xanthan gum on the rheology and filtration loss of water-based drilling fluids
Husam Al-Ziyadi and Amit VermaPetroleum Science and Technology 44 (7) 999 (2026)
https://doi.org/10.1080/10916466.2024.2445696
Interfacial and size effects in high-pressure rheology: A review
Zhaoyang Sun, Hui Cao, Jingbo Fang, Tianhui Sun, Pengpeng Bai and Yu TianAdvances in Colloid and Interface Science 352 103827 (2026)
https://doi.org/10.1016/j.cis.2026.103827
Structure–function analysis of an illite–montmorillonite organoclay blend for HPHT oil-based drilling fluids
Ali Mahmoud, Rahul Gajbhiye and Salaheldin ElkatatnyMaterials Chemistry and Physics 354 132186 (2026)
https://doi.org/10.1016/j.matchemphys.2026.132186
Impact of hydroxypropyl guar polymer on rheology and filtration properties of water-based drilling fluids
Husam Al-Ziyadi, Narendra Kumar and Amit VermaPetroleum 11 (3) 320 (2025)
https://doi.org/10.1016/j.petlm.2025.03.006
Review of Applicable Polymeric Viscosifiers and Nanomaterials in the Oil Industry
Ali Salmani Sayah, Mohammad Hossein Bagheri, Kamand Ghasemi, Sasan Dan and Mohammad SharifiACS Omega (2025)
https://doi.org/10.1021/acsomega.5c05107
The influence of alkyl ammonium modifiers on the microstructure and high-pressure rheology of sepiolite-vegetable oil dispersions
M.J. Martín-Alfonso, A. Mejía, F.J. Martínez-Boza and P. PartalApplied Clay Science 247 107210 (2024)
https://doi.org/10.1016/j.clay.2023.107210
Green drilling fluid additives for a sustainable hole-cleaning performance: a comprehensive review
Husameldin Mahmoud, Arafat A. A. Mohammed, Mustafa.S. Nasser, Ibnelwaleed A. Hussein and Muftah H. El-NaasEmergent Materials 7 (2) 387 (2024)
https://doi.org/10.1007/s42247-023-00524-w
https://doi.org/10.1016/B978-0-443-15598-7.00011-0
https://doi.org/10.1016/B978-0-323-99285-5.00010-7
Fluid Mechanics of Viscoplasticity
Raja R. Huilgol and Georgios C. GeorgiouFluid Mechanics of Viscoplasticity 91 (2022)
https://doi.org/10.1007/978-3-030-98503-5_5
Bentonite-free water-based drilling fluids at HP/HT condition: a rheometric analysis
Luis H. Quitian, Diogo E. V. Andrade and Admilson T. FrancoRheologica Acta 61 (11-12) 841 (2022)
https://doi.org/10.1007/s00397-022-01356-x
Influence of pressure on the gel strength and on the solid-like behavior for an inverted emulsion drilling fluid
Géssica Palaoro, Diogo E.V. Andrade, Jonathan F. Galdino, Admilson T. Franco, Elessandre Alves and Alex WaldmannJournal of Petroleum Science and Engineering 219 111114 (2022)
https://doi.org/10.1016/j.petrol.2022.111114
A comprehensive review of laboratory, field and modelling studies on drilling mud rheology in high temperature high pressure (HTHP) conditions
Okorie E. Agwu, Julius U. Akpabio, Moses E. Ekpenyong, Udoinyang G. Inyang, Daniel E. Asuquo, Imo J. Eyoh and Olufemi S. AdeoyeJournal of Natural Gas Science and Engineering 94 104046 (2021)
https://doi.org/10.1016/j.jngse.2021.104046
Prediction of High-Pressure/High-Temperature Rheological Properties of Drilling Fluids from the Viscosity Data Measured on a Coaxial Cylinder Viscometer
Sidharth Gautam, Chandan Guria and Laldeep GopeSPE Journal 26 (05) 2527 (2021)
https://doi.org/10.2118/206714-PA
Rheological characterization of sepiolite-vegetable oil suspensions at high pressures
M.J. Martín-Alfonso, A. Mejía, F.J. Martínez-Boza and J.E. Martín-AlfonsoApplied Clay Science 212 106220 (2021)
https://doi.org/10.1016/j.clay.2021.106220
Effects of cationic modifier type on the structure and morphology of organo-montmorillonite and its application properties in a high-temperature white oil system
Yingyi Nong, Jinlong Sun, Meng Fu, Huiwen Chen and Zepeng ZhangApplied Clay Science 203 105995 (2021)
https://doi.org/10.1016/j.clay.2021.105995
A critical review of drilling mud rheological models
Okorie E. Agwu, Julius U. Akpabio, Moses E. Ekpenyong, Udoinyang G. Inyang, Daniel E. Asuquo, Imoh J. Eyoh and Olufemi S. AdeoyeJournal of Petroleum Science and Engineering 203 108659 (2021)
https://doi.org/10.1016/j.petrol.2021.108659
Thermal and Rheological Properties of Hydrophobic Nanosilica in Sunflower Oil Suspensions at High Pressures
María J. Martín-Alfonso, Javier Pozo, Clara Delgado-Sánchez and Francisco José Martínez-BozaNanomaterials 11 (11) 3037 (2021)
https://doi.org/10.3390/nano11113037
Influence of Formate Concentration on the Rheology and Thermal Degradation of Xanthan Gum
María José Martín-Alfonso, Javier Mauricio Loaiza, Clara Delgado-Sánchez and Francisco José Martínez-BozaPolymers 13 (19) 3378 (2021)
https://doi.org/10.3390/polym13193378
Advances and challenges in the high-pressure rheology of complex fluids
Amit Ahuja, Reginald Lee and Yogesh M. JoshiAdvances in Colloid and Interface Science 294 102472 (2021)
https://doi.org/10.1016/j.cis.2021.102472
The effect of lubricant additives on the tribological performance of oil and gas drilling applications up to 200 °C
Pixiang Lan, Larry L. Iaccino, Xiaoying Bao and Andreas A. PolycarpouTribology International 141 105896 (2020)
https://doi.org/10.1016/j.triboint.2019.105896
Unidirectional flows of a Herschel–Bulkley fluid with pressure-dependent rheological moduli
Lorenzo FusiThe European Physical Journal Plus 135 (7) (2020)
https://doi.org/10.1140/epjp/s13360-020-00555-w
Effect of a modified nano clay and nano graphene on rheology, stability of water-in-oil emulsion, and filtration control ability of oil-based drilling fluids: a comparative experimental approach
Vahid Nooripoor and Abdolnabi HashemiOil & Gas Science and Technology – Revue d’IFP Energies nouvelles 75 40 (2020)
https://doi.org/10.2516/ogst/2020032
Synthesis and characterization of Tunisian organoclay: Application as viscosifier in oil drilling fluid
Imed Msadok, Noureddine Hamdi, M.A. Rodríguez, Begoña Ferrari and Ezzeddine SrasraChemical Engineering Research and Design 153 427 (2020)
https://doi.org/10.1016/j.cherd.2019.11.010
Modelling of fluid flow through porous media using memory approach: A review
Mahamudul Hashan, Labiba Nusrat Jahan, Tareq-Uz-Zaman, Syed Imtiaz and M. Enamul HossainMathematics and Computers in Simulation 177 643 (2020)
https://doi.org/10.1016/j.matcom.2020.05.026
Annular pressure-driven flow of a Bingham plastic with pressure-dependent rheological parameters
Iasonas Ioannou and Georgios C. GeorgiouRheologica Acta 58 (10) 699 (2019)
https://doi.org/10.1007/s00397-019-01168-6
Lubrication solution of the flow of a Herschel-Bulkley fluid with pressure-dependent rheological parameters in an asymmetric channel
Pandelitsa Panaseti, Georgios C. Georgiou and Iasonas IoannouPhysics of Fluids 31 (2) (2019)
https://doi.org/10.1063/1.5087654
Unsteady non-isothermal flow of a viscoplastic fluid with non-constant material moduli at low Reynolds number
Lorenzo FusiActa Mechanica 229 (1) 193 (2018)
https://doi.org/10.1007/s00707-017-1964-7
Pressure-driven flow of a Herschel-Bulkley fluid with pressure-dependent rheological parameters
Pandelitsa Panaseti, Yiolanda Damianou, Georgios C. Georgiou and Kostas D. HousiadasPhysics of Fluids 30 (3) (2018)
https://doi.org/10.1063/1.5002650
Creeping flow of a Herschel–Bulkley fluid with pressure-dependent material moduli
L. FUSI and F. ROSSOEuropean Journal of Applied Mathematics 29 (2) 352 (2018)
https://doi.org/10.1017/S0956792517000183
Experimental study on microstructure and rheological behavior of organobentonite/oil-based drilling fluid
Mohammad Ghavami, Bashir Hasanzadeh, Qian Zhao, Sadra Javadi and Daryoush Yousefi KebriaJournal of Molecular Liquids 263 147 (2018)
https://doi.org/10.1016/j.molliq.2018.04.137
Axisymmetric Poiseuille flow of a Bingham plastic with rheological parameters varying linearly with pressure
Iasonas Ioannou and Georgios C. GeorgiouJournal of Non-Newtonian Fluid Mechanics 259 16 (2018)
https://doi.org/10.1016/j.jnnfm.2018.05.004
Lubrication solution of the axisymmetric Poiseuille flow of a Bingham fluid with pressure-dependent rheological parameters
Kostas D. Housiadas, Iasonas Ioannou and Georgios C. GeorgiouJournal of Non-Newtonian Fluid Mechanics 260 76 (2018)
https://doi.org/10.1016/j.jnnfm.2018.06.003
A generalized model for apparent viscosity of oil-based muds
Muili F. Fakoya and Ramadan M. AhmedJournal of Petroleum Science and Engineering 165 777 (2018)
https://doi.org/10.1016/j.petrol.2018.03.029
Modeling Pressure-Viscosity Behavior of Oil-Based Drilling Fluids
Juan Hermoso, Francisco J. Martínez-Boza and Críspulo GallegosOil & Gas Science and Technology – Revue d’IFP Energies nouvelles 72 (4) 18 (2017)
https://doi.org/10.2516/ogst/2017014
Comparative study on the structures and properties of organo-montmorillonite and organo-palygorskite in oil-based drilling fluids
Guanzheng Zhuang, Zepeng Zhang, Maguy Jaber, Jiahua Gao and Shanmao PengJournal of Industrial and Engineering Chemistry 56 248 (2017)
https://doi.org/10.1016/j.jiec.2017.07.017
On Poiseuille flows of a Bingham plastic with pressure-dependent rheological parameters
Yiolanda Damianou and Georgios C. GeorgiouJournal of Non-Newtonian Fluid Mechanics 250 1 (2017)
https://doi.org/10.1016/j.jnnfm.2017.10.002
Organoclay influence on high pressure-high temperature volumetric properties of oil-based drilling fluids
J. Hermoso, F.J. Martínez-Boza and C. GallegosJournal of Petroleum Science and Engineering 151 13 (2017)
https://doi.org/10.1016/j.petrol.2017.01.040
Structure and performance of anionic–cationic-organo-montmorillonite in different organic solvents
Jinlong Sun, Guanzheng Zhuang, Sanqin Wu and Zepeng ZhangRSC Advances 6 (60) 54747 (2016)
https://doi.org/10.1039/C6RA05364E