Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

This article has been cited by the following article(s):

Numerical investigation of the combustion characteristics and wall impingement with dependence on split-injection strategies from a gasoline direct-injection spark ignition engine

Juhyeong Seo, Jae Seong Lee, Kwan Hee Choi, Ho Young Kim and Sam S. Yoon
Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 227 (11) 1518 (2013)
DOI: 10.1177/0954407013491216
See this article

Potential of Using a Nozzle at the Compressor Inlet of a High-Speed Direct-Injection Diesel Engine

J M Desantes, J M Luján, B Plá and J A Soler
Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 225 (2) 178 (2011)
DOI: 10.1243/09544070JAUTO1429
See this article

Robust proportional ECMS control of a parallel hybrid electric vehicle

Wisdom Enang and Chris Bannister
Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 231 (1) 99 (2017)
DOI: 10.1177/0954407016659198
See this article

One-dimensional simulations and experimental analysis of a wastegated turbine for automotive engines under unsteady flow conditions

Vincenzo De Bellis and Silvia Marelli
Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 229 (13) 1801 (2015)
DOI: 10.1177/0954407015571672
See this article

Experimental analysis on spray development of 2-methylfuran–gasoline blends using multi-hole DI injector

Haiqiao Wei, Dongzhi Gao, Lei Zhou, et al.
Fuel 164 245 (2016)
DOI: 10.1016/j.fuel.2015.10.012
See this article

Comparative analysis of the characteristics of a low-pressure gas-phase injector

Dariusz Szpica
Flow Measurement and Instrumentation 58 74 (2017)
DOI: 10.1016/j.flowmeasinst.2017.09.012
See this article

Combined effects of cooled EGR and a higher geometric compression ratio on thermal efficiency improvement of a downsized boosted spark-ignition direct-injection engine

Jianye Su, Min Xu, Tie Li, Yi Gao and Jiasheng Wang
Energy Conversion and Management 78 65 (2014)
DOI: 10.1016/j.enconman.2013.10.041
See this article

The effect of boost pressure on the performance characteristics of a diesel engine: A neuro-fuzzy approach

I. Al-Hinti, M. Samhouri, A. Al-Ghandoor and A. Sakhrieh
Applied Energy 86 (1) 113 (2009)
DOI: 10.1016/j.apenergy.2008.04.015
See this article

Light Metals 2013

Sebastian F. Fischer, Veronika F. Groten, Johannes Brachmann, et al.
Light Metals 2013 1029 (2013)
DOI: 10.1002/9781118663189.ch174
See this article

Observer Design for Downsized Gasoline Engine Control Using 1D Engine Simulation

A. Albrecht, V. Knop, G. Corde, L. Simonet and M. Castagné
Oil & Gas Science and Technology 61 (1) 165 (2006)
DOI: 10.2516/ogst:2006011x
See this article

Multi-objective optimization of a natural aspirated three-cylinder spark ignition engine using modified non-dominated sorting genetic algorithm and multicriteria decision making

Mohammad Hassan Shojaeefard, Abolfazl Khalkhali and Alireza Firouzgan
Journal of Renewable and Sustainable Energy 8 (2) 025705 (2016)
DOI: 10.1063/1.4945573
See this article

Turning of High-strength Bainitic and Quenched and Tempered Steels

D. Biermann, H. Hartmann, I. Terwey, C. Merkel and D. Kehl
Procedia CIRP 7 276 (2013)
DOI: 10.1016/j.procir.2013.05.047
See this article

Effects of N/C Ratio on Solidification Behaviors of Novel Nb-Bearing Austenitic Heat-Resistant Cast Steels for Exhaust Components of Gasoline Engines

Yinhui Zhang, Mei Li, Larry A. Godlewski, Jacob W. Zindel and Qiang Feng
Metallurgical and Materials Transactions A 48 (3) 1151 (2017)
DOI: 10.1007/s11661-016-3920-x
See this article

Hybridization of powertrain and downsizing of IC engine – A way to reduce fuel consumption and pollutant emissions – Part 1

Tomaž Katrašnik
Energy Conversion and Management 48 (5) 1411 (2007)
DOI: 10.1016/j.enconman.2006.12.004
See this article

Coordinated Performance Optimization of a Variable Geometry Compressor With Model Predictive Control for a Turbocharged Diesel Engine

Junqiang Zhou, Lisa Fiorentini, Marcello Canova and Yue-Yun Wang
IEEE Transactions on Control Systems Technology 24 (3) 804 (2016)
DOI: 10.1109/TCST.2015.2468085
See this article

Decomposition of hydrocarbons to hydrogen and carbon

Shakeel Ahmed, Abdullah Aitani, Faizur Rahman, Ali Al-Dawood and Fahad Al-Muhaish
Applied Catalysis A: General 359 (1-2) 1 (2009)
DOI: 10.1016/j.apcata.2009.02.038
See this article

Numerical analyses of EGR techniques in a turbocharged spark-ignition engine

Enzo Galloni, Gustavo Fontana and Roberto Palmaccio
Applied Thermal Engineering 39 95 (2012)
DOI: 10.1016/j.applthermaleng.2012.01.040
See this article

Modeling and Control of Engines and Drivelines

Modeling and Control of Engines and Drivelines 541 (2014)
DOI: 10.1002/9781118536186.refs
See this article

Powertrain sizing of electrically supercharged internal combustion engine vehicles

Nikolce Murgovski, Sava Marinkov, Daniël Hilgersom, et al.
IFAC-PapersOnLine 48 (15) 101 (2015)
DOI: 10.1016/j.ifacol.2015.10.015
See this article

Effects of tungsten and molybdenum on high-temperature tensile properties of five heat-resistant austenitic stainless steels

Seungmun Jung, Changwoo Jeon, Yong Hee Jo, et al.
Materials Science and Engineering: A 656 190 (2016)
DOI: 10.1016/j.msea.2016.01.022
See this article

Interaction of Flame Propagation and Pressure Waves During Knocking Combustion in Spark-Ignition Engines

Jiaying Pan, Gequn Shu and Haiqiao Wei
Combustion Science and Technology 186 (2) 192 (2014)
DOI: 10.1080/00102202.2013.857665
See this article

Analysis of onset and severity of knock in SI engine based on in-cylinder pressure oscillations

Gequn Shu, Jiaying Pan and Haiqiao Wei
Applied Thermal Engineering 51 (1-2) 1297 (2013)
DOI: 10.1016/j.applthermaleng.2012.11.039
See this article

Comparative investigation on performance of various aspiration methods applied in a single cylinder diesel engine

Palaniswamy Duraiswamy, Ramesh Guru and Vishnu Madakkan
Emerging Materials Research 4 (2) 247 (2015)
DOI: 10.1680/emr.14.00032
See this article

Component sizing for compound hybrid excavators

Qian Zhu, Qingfeng Wang and Qihuai Chen
Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 230 (7) 969 (2016)
DOI: 10.1177/0954407015598241
See this article

Lifecycle optimized ethanol-gasoline blends for turbocharged engines

Bo Zhang and S. Mani Sarathy
Applied Energy 181 38 (2016)
DOI: 10.1016/j.apenergy.2016.08.052
See this article

Analysis and simulation of “low-cost” strategies to reduce fuel consumption and emissions in conventional gasoline light-duty vehicles

Carla Silva, Marc Ross and Tiago Farias
Energy Conversion and Management 50 (2) 215 (2009)
DOI: 10.1016/j.enconman.2008.09.046
See this article

Experimental characteristics of turbulent premixed flame in a boosted Spark-Ignition engine

C. Mounaïm-Rousselle, L. Landry, F. Halter and F. Foucher
Proceedings of the Combustion Institute 34 (2) 2941 (2013)
DOI: 10.1016/j.proci.2012.09.008
See this article

Light Metals 2013

Sebastian F. Fischer, Veronika F. Groten, Johannes Brachmann, et al.
The Minerals, Metals & Materials Series, Light Metals 2013 1031 (2016)
DOI: 10.1007/978-3-319-65136-1_174
See this article

Scaling and dimensional methods to incorporate knock and flammability limits in models of high-efficiency gasoline and ethanol engines

Anne Lewis, Elliott Ortiz-Soto, George Lavoie and Dennis N Assanis
International Journal of Engine Research 16 (2) 181 (2015)
DOI: 10.1177/1468087414530387
See this article

Modeling for Estimation of Wave Action in Multi-Cylinder Turbocharged SI Engines

Stephanie Stockar, Marcello Canova, Baitao Xiao, Julia Buckland and Wen Dai
IFAC-PapersOnLine 49 (11) 708 (2016)
DOI: 10.1016/j.ifacol.2016.08.103
See this article

A review of the application of variable geometry turbines to the downsized gasoline engine

Huayin Tang, Andrew Pennycott, Sam Akehurst and Chris J Brace
International Journal of Engine Research 16 (6) 810 (2015)
DOI: 10.1177/1468087414552289
See this article

Some effects of gasoline and diesel mixtures on partially premixed combustion and comparison with the practical fuels gasoline and diesel in a compression ignition engine

Hyun Woo Won, Heinz Pitsch, Nigel Tait and Gautam Kalghatgi
Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 226 (9) 1259 (2012)
DOI: 10.1177/0954407012440075
See this article

Robust control for the air path of a downsized engine

G Colin, Y Chamaillard and B Bellicaud
Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 225 (7) 930 (2011)
DOI: 10.1177/0954407011401503
See this article

A numerical study on the effects of EGR and spark timing to combustion characteristics and NOxemission of a GDI engine

Seyfi Polat, Ahmet Uyumaz, Hamit Solmaz, et al.
International Journal of Green Energy 13 (1) 63 (2016)
DOI: 10.1080/15435075.2014.909361
See this article

Knock-limited spark angle setting by means of statistical or dynamic pressure based methods

Enzo Galloni
Energy Conversion and Management 116 11 (2016)
DOI: 10.1016/j.enconman.2016.02.070
See this article

Simulation research on the effect of cooled EGR, supercharging and compression ratio on downsized SI engine knock

Gequn Shu, Jiaying Pan, Haiqiao Wei and Ning Shi
Chinese Journal of Mechanical Engineering 26 (2) 341 (2013)
DOI: 10.3901/CJME.2013.02.341
See this article

An integrated turbocharger design approach to improve engine performance

YangJun Zhang, Tao Chen, WeiLin Zhuge, ShuYong Zhang and JianZhong Xu
Science in China Series E: Technological Sciences 53 (1) 69 (2010)
DOI: 10.1007/s11431-009-0421-9
See this article

Convex Modeling and Sizing of Electrically Supercharged Internal Combustion Engine Powertrain

Sava Marinkov, Nikolce Murgovski and Bram de Jager
IEEE Transactions on Vehicular Technology 65 (6) 4523 (2016)
DOI: 10.1109/TVT.2015.2510510
See this article

Experimental Study of the Polytropic Coefficient for an Air-Cooled, High-Compression-Ratio, Spark-Ignition Engine Fueled with Natural Gas, Biogas, and a Propane–Syngas Blend

Sebastián H. Quintana, Edisson S. Castaño-Mesa and Iván D. Bedoya
Energy & Fuels 32 (2) 2376 (2018)
DOI: 10.1021/acs.energyfuels.7b03063
See this article

Computational singular perturbation analysis of super-knock in SI engines

Mohammed Jaasim, Efstathios-Al. Tingas, Francisco E. Hernández Pérez and Hong G. Im
Fuel 225 184 (2018)
DOI: 10.1016/j.fuel.2018.03.128
See this article

Engine displacement modularity for enhancing automotive s.i. engines efficiency at part load

F. Millo, M. Mirzaeian, S. Luisi, V. Doria and A. Stroppiana
Fuel 180 645 (2016)
DOI: 10.1016/j.fuel.2016.04.049
See this article

Intake Manifold Boosting of Turbocharged Spark-Ignited Engines

Norbert Zsiga, Christoph Voser, Christopher Onder and Lino Guzzella
Energies 6 (3) 1746 (2013)
DOI: 10.3390/en6031746
See this article

Acetone laser-induced fluorescence behavior for the simultaneous quantification of temperature and residual gas distribution in fired spark-ignition engines

Micha Löffler, Frank Beyrau and Alfred Leipertz
Applied Optics 49 (1) 37 (2010)
DOI: 10.1364/AO.49.000037
See this article

Improvement in the stability of a turbocharger centrifugal compressor by tip leakage control

Saeed Mirzaee, Xinqian Zheng and Yun Lin
Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 231 (5) 700 (2017)
DOI: 10.1177/0954407016656543
See this article

A novel predictive semi-physical feed-forward turbocharging system transient control strategy based on mean-value turbocharger model

Huayin Tang, Colin Copeland, Sam Akehurst, et al.
International Journal of Engine Research 18 (8) 765 (2017)
DOI: 10.1177/1468087416670052
See this article

Comparison of combustion characteristics of n-butanol/ethanol–gasoline blends in a HCCI engine

Bang-Quan He, Mao-Bin Liu and Hua Zhao
Energy Conversion and Management 95 101 (2015)
DOI: 10.1016/j.enconman.2015.02.019
See this article

Interpretation of high-temperature tensile properties by thermodynamically calculated equilibrium phase diagrams of heat-resistant austenitic cast steels

Seungmun Jung, Seok Su Sohn, Won-Mi Choi, et al.
Metals and Materials International 23 (1) 43 (2017)
DOI: 10.1007/s12540-017-6328-2
See this article

Design innovation in dynamic coupling of starting system for internal combustion engines

Alvaro Canto Michelotti and Jonny Carlos da Silva
Journal of the Brazilian Society of Mechanical Sciences and Engineering 38 (1) 177 (2016)
DOI: 10.1007/s40430-015-0375-8
See this article

Turbocharger Performance Simulation with Optimized 1D Model

Xiao Yang Gong and Rui Chen
Advanced Materials Research 516-517 692 (2012)
DOI: 10.4028/
See this article

How Well Do We Know the Future of CO2 Emissions? Projecting Fleet Emissions from Light Duty Vehicle Technology Drivers

Niall P. D. Martin, Justin D. K. Bishop and Adam M. Boies
Environmental Science & Technology 51 (5) 3093 (2017)
DOI: 10.1021/acs.est.6b04746
See this article

The determination of the flow characteristics of a low-pressure vapor-phase injector with a dynamic method

Dariusz Szpica
Flow Measurement and Instrumentation 62 44 (2018)
DOI: 10.1016/j.flowmeasinst.2018.05.010
See this article

Effects of W on creep behaviors of novel Nb-bearing high nitrogen austenitic heat-resistant cast steels at 1000 °C

Yinhui Zhang, Mei Li, Larry A. Godlewski, Jacob W. Zindel and Qiang Feng
Materials Characterization 139 19 (2018)
DOI: 10.1016/j.matchar.2018.02.027
See this article

Investigating fuel dosage non-repeatability of low-pressure gas-phase injectors

Dariusz Szpica
Flow Measurement and Instrumentation 59 147 (2018)
DOI: 10.1016/j.flowmeasinst.2017.12.009
See this article

The impact from the direct injection and multi-port fuel injection technologies for gasoline vehicles on solid particle number and black carbon emissions

Liqiang He, Jingnan Hu, Shaojun Zhang, et al.
Applied Energy 226 819 (2018)
DOI: 10.1016/j.apenergy.2018.06.050
See this article

Steady Modeling of a Turbocharger Turbine for Automotive Engines

Fabio Bozza and Vincenzo De Bellis
Journal of Engineering for Gas Turbines and Power 136 (1) 011701 (2013)
DOI: 10.1115/1.4025263
See this article

Impact of fuel molecular structure on auto-ignition behavior – Design rules for future high performance gasolines

Michael D. Boot, Miao Tian, Emiel J.M. Hensen and S. Mani Sarathy
Progress in Energy and Combustion Science 60 1 (2017)
DOI: 10.1016/j.pecs.2016.12.001
See this article

Research on in-cylinder pressure oscillation characteristic during knocking combustion in spark-ignition engine

Jiaying Pan, Gequn Shu and Haiqiao Wei
Fuel 120 150 (2014)
DOI: 10.1016/j.fuel.2013.11.054
See this article

Comparative nanostructure analysis of gasoline turbocharged direct injection and diesel soot-in-oil with carbon black

S.A. Pfau, A. La Rocca, E. Haffner-Staton, et al.
Carbon 139 342 (2018)
DOI: 10.1016/j.carbon.2018.06.050
See this article

Effects of Cr and Nb addition on high-temperature tensile properties in austenitic cast steels used for turbo-charger application

Seungmun Jung, Seok Su Sohn, Yong Hee Jo, et al.
Materials Science and Engineering: A 677 316 (2016)
DOI: 10.1016/j.msea.2016.09.049
See this article

An experimental investigation of internal heat transfer in an automotive turbocharger compressor

Giovanni Tanda, Silvia Marelli, Giulio Marmorato and Massimo Capobianco
Applied Energy 193 531 (2017)
DOI: 10.1016/j.apenergy.2017.02.053
See this article

Simulating the effects of turbocharging on the emission levels of a gasoline engine

Amir Reza Mahmoudi, Iman Khazaee and Mohsen Ghazikhani
Alexandria Engineering Journal 56 (4) 737 (2017)
DOI: 10.1016/j.aej.2017.03.005
See this article

The influence of selected adjustment parameters on the operation of LPG vapor phase pulse injectors

Dariusz Szpica
Journal of Natural Gas Science and Engineering 34 1127 (2016)
DOI: 10.1016/j.jngse.2016.08.014
See this article

Experimental Analysis for Performance Evaluation and Unsteadiness Quantification for One Turbocharger Vane-Less Radial Turbine Operating on a Gasoline Engine

Ahmed Ketata, Zied Driss and Mohamed Salah Abid
Arabian Journal for Science and Engineering 43 (9) 4763 (2018)
DOI: 10.1007/s13369-018-3171-9
See this article

Effect of injection strategies on particulate matter structures of a turbocharged GDI engine

Marco Potenza, Marco Milanese and Arturo de Risi
Fuel 237 413 (2019)
DOI: 10.1016/j.fuel.2018.09.130
See this article

Validation of indirect methods used in the operational assessment of LPG vapor phase pulse injectors

Dariusz Szpica
Measurement 118 253 (2018)
DOI: 10.1016/j.measurement.2018.01.045
See this article

Interactions of flame propagation, auto-ignition and pressure wave during knocking combustion

Jiaying Pan, Gequn Shu, Peng Zhao, Haiqiao Wei and Zheng Chen
Combustion and Flame 164 319 (2016)
DOI: 10.1016/j.combustflame.2015.11.030
See this article

Investigation of onboard fuel separation for passenger vehicles

Ahmad Khan, Kai Morganti, Marwan Sendi, Mohammed Almansour and Esam Hamad
Energy 169 1079 (2019)
DOI: 10.1016/
See this article

Fuel-to-air ratio control under short-circuit conditions through UEGO sensor signal analysis

Carlos Guardiola, Benjamín Pla, Marcelo Real, Cyril Travaillard and Frederic Dambricourt
International Journal of Engine Research 146808741882074 (2019)
DOI: 10.1177/1468087418820747
See this article

Modelling and control of hybrid electric vehicles (A comprehensive review)

Wisdom Enang and Chris Bannister
Renewable and Sustainable Energy Reviews 74 1210 (2017)
DOI: 10.1016/j.rser.2017.01.075
See this article

Organic Rankine Cycles (ORC) for mobile applications – Economic feasibility in different transportation sectors

Roberto Pili, Alessandro Romagnoli, Kai Kamossa, et al.
Applied Energy 204 1188 (2017)
DOI: 10.1016/j.apenergy.2017.04.056
See this article

The role of market and technical downsizing in reducing carbon emissions from the Swedish new car fleet

Frances Sprei and Sten Karlsson
Energy Efficiency 1 (2) 107 (2008)
DOI: 10.1007/s12053-008-9016-8
See this article

Fluid Machinery and Fluid Mechanics

Yangjun Zhang, Weilin Zhuge, Shuyong Zhang and Jianzhong Xu
Fluid Machinery and Fluid Mechanics 227 (2009)
DOI: 10.1007/978-3-540-89749-1_32
See this article

A Computational Study of Abnormal Combustion Characteristics in Spark Ignition Engines

Mohammed Jaasim Mubarak Ali, Francisco Hernandez Perez, Aliou Sow and Hong Im
SAE International Journal of Engines 11 (6) 743 (2018)
DOI: 10.4271/2018-01-0179
See this article

Fast Simulation of Wave Action in Engine Air Path Systems Using Model Order Reduction

Stephanie Stockar, Marcello Canova, Baitao Xiao, Wengang Dai and Julia Buckland
SAE International Journal of Engines 9 (3) 1398 (2016)
DOI: 10.4271/2016-01-0572
See this article

Advanced Numerical and Experimental Techniques for the Extension of a Turbine Mapping

Vincenzo De Bellis, Fabio Bozza, Christof Schernus and Tolga Uhlmann
SAE International Journal of Engines 6 (3) 1771 (2013)
DOI: 10.4271/2013-24-0119
See this article