Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Data-driven constitutive meta-modeling of nonlinear rheology via multifidelity neural networks

Milad Saadat, William H. Hartt V, Norman J. Wagner and Safa Jamali
Journal of Rheology 68 (5) 679 (2024)
https://doi.org/10.1122/8.0000831

Rheology of amino-functionalized graphene oxide suspensions in hydrogels

Lorena R. da C. Moraes, Hélio Ribeiro, Ricardo J. E. Andrade and Mônica F. Naccache
Physics of Fluids 36 (1) (2024)
https://doi.org/10.1063/5.0185524

Applicability of sawdust as a green additive to improve the rheological and filtration properties of water-based drilling fluid: an experimental investigation

Md. Ashiqul Islam Shuvo, Md. Zayed Bin Sultan and A. R. Rafi Ferdous
Journal of Petroleum Exploration and Production Technology 14 (1) 303 (2024)
https://doi.org/10.1007/s13202-023-01706-2

Experimental study of hydrophilic additives on filter cake permeability and filtrate losses

Mohamad Ahmad Abed and Mohammad Reza Rasaei
The Canadian Journal of Chemical Engineering 102 (5) 1825 (2024)
https://doi.org/10.1002/cjce.25167

Enhancement of Rheological Properties of Nano-Fe2O3-Modified Drilling Fluids

Abdoulaye Seyni Mahamadou and Gu Jun
SPE Journal 1 (2024)
https://doi.org/10.2118/223105-PA

Filter Cake Neural-Objective Data Modeling and Image Optimization

Dennis Delali Kwesi Wayo, Sonny Irawan, Alfrendo Satyanaga, Jong Kim, Mohd Zulkifli Bin Mohamad Noor and Vamegh Rasouli
Symmetry 16 (8) 1072 (2024)
https://doi.org/10.3390/sym16081072

Effect and consequence of the rheological properties of nano Fe2O3-modified drilling muds in the Dibella oil field

Abdoulaye seyni Mahamadou, Gu Jun and Maimouna Issa Moctar
Frontiers in Energy Research 12 (2024)
https://doi.org/10.3389/fenrg.2024.1375463

Thermal plasma vitrification treatment of oil-based drill cuttings: Product characterization and harmless transformation

Junhu Zhou, Zhuofan Zhai, Jinlong Wu, Weijuan Yang and Jianzhong Liu
Journal of Environmental Management 331 117285 (2023)
https://doi.org/10.1016/j.jenvman.2023.117285

Environmental, health and safety assessment of nanoparticle application in drilling mud – Review

C. Martin, A. Nourian, M. Babaie and G.G. Nasr
Geoenergy Science and Engineering 226 211767 (2023)
https://doi.org/10.1016/j.geoen.2023.211767

High energy dissipation-based process to improve the rheological properties of bentonite drilling muds by reducing the particle size

Hae Jin Jo, Sung Hyun Hong, Byung Min Lee, Young Ju Kim, Wook Ryol Hwang and Soo Young Kim
Ultrasonics Sonochemistry 92 106246 (2023)
https://doi.org/10.1016/j.ultsonch.2022.106246

Numerical simulation of particle impact drilling (PID) systems: a one-way coupled approach

G. Casas, I. de-Pouplana, R. Gandikota and E. Oñate
Computational Particle Mechanics 9 (4) 735 (2022)
https://doi.org/10.1007/s40571-021-00440-y

Modified Corn Starch as an Environmentally Friendly Rheology Enhancer and Fluid Loss Reducer for Water-Based Drilling Mud

Emanuel Ricky, Musa Mpelwa, Chao Wang, Bahati Hamad and Xingguang Xu
SPE Journal 27 (02) 1064 (2022)
https://doi.org/10.2118/209195-PA

Enhancement of Static and Dynamic Sag Performance of Water-Based Mud Using a Synthetic Clay

Abdelmjeed Mohamed, Salem Basfar, Salaheldin Elkatatny and Abdulaziz Al-Majed
ACS Omega 6 (12) 8179 (2021)
https://doi.org/10.1021/acsomega.0c06186

A New Comparative Evaluation for the Rheological and Filtration Properties of Water-Based Drilling Fluids Utilizing Sodium Salt of Linear and Cross-Linked Acrylate Polymer Hydrogels

A. M. Fadl, M. I. Abdou, Hamed Y. Moustafa, et al.
Arabian Journal for Science and Engineering 46 (7) 6989 (2021)
https://doi.org/10.1007/s13369-021-05399-9

The Effect of Biopolymer Chitosan on the Rheology and Stability of Na-Bentonite Drilling Mud

Basim Abu-Jdayil, Mamdouh Ghannam, Karam Alsayyed Ahmed and Mohamed Djama
Polymers 13 (19) 3361 (2021)
https://doi.org/10.3390/polym13193361

Impact of Natural Polymer (Xanthan Gum) and Bentonite Clay on the Development of Oil-In-Water (O/W) Emulsion Drilling Fluids

Dr. Praveen Kumar Jha*, Dr. Vinod Kumar Saxena, Prof. Suresh Kumar Yatirajula and Dr. Ayanagounder Kumar
International Journal of Innovative Technology and Exploring Engineering 10 (10) 129 (2021)
https://doi.org/10.35940/ijitee.I9344.08101021

A rapid change in microbial communities of the shale gas drilling fluid from 3548 m depth to the above-ground storage tank

Hong Mei Mu, Yun Yang Wan, Bai Chun Wu, et al.
Science of The Total Environment 784 147009 (2021)
https://doi.org/10.1016/j.scitotenv.2021.147009

Adsorption of cetyltrimethyl ammonium bromide surfactant for organophilization of palygorskite clay

Rhaul P. Silva, Alisson G.B. Gois, Michele O. Ramme, et al.
Clay Minerals 56 (2) 140 (2021)
https://doi.org/10.1180/clm.2021.27

Newly Developed Correlations to Predict the Rheological Parameters of High-Bentonite Drilling Fluid Using Neural Networks

Ahmed Gowida, Salaheldin Elkatatny, Khaled Abdelgawad and Rahul Gajbhiye
Sensors 20 (10) 2787 (2020)
https://doi.org/10.3390/s20102787

Study of the Potential of Sodium Carbonate Extracted from Trona as a Drilling Fluid Additive

Petrus Nzerem, Enyo June Adejoh, Oghenerume Ogolo, et al.
International Journal of Engineering Research in Africa 49 152 (2020)
https://doi.org/10.4028/www.scientific.net/JERA.49.152

Quantify the effect of temperature on the electrical resistivity, yield stress, and HPHT fluid loss of the bentonite-clay drilling mud modified with acrylamide polymer

C. Vipulanandan and A. Mohammed
Journal of Building Pathology and Rehabilitation 5 (1) (2020)
https://doi.org/10.1007/s41024-020-00085-z

Impact of organophilic clay on rheological properties of gasoil-based drilling muds

Cheikh Bergane and Larbi Hammadi
Journal of Petroleum Exploration and Production Technology 10 (8) 3533 (2020)
https://doi.org/10.1007/s13202-020-01008-x

Effect of Formation Cutting’s Mechanical Properties on Drilling Fluid Properties During Drilling Operations

Badr S. Bageri, Mohammed Benaafi, Mohamed Mahmoud, et al.
Arabian Journal for Science and Engineering 45 (9) 7763 (2020)
https://doi.org/10.1007/s13369-020-04424-7

Gravitational solid-liquid separation of water-based drilling fluids weighted with hematite through the gamma-ray attenuation technique

F.M. Fagundes, N.B.C. Santos, A.L. Martins, J.J.R. Damasceno and F.O. Arouca
Journal of Petroleum Science and Engineering 180 406 (2019)
https://doi.org/10.1016/j.petrol.2019.05.054

Study on the stability of a shear-thinning suspension used in oil well drilling

Flávia M. Fagundes, Nara B.C. Santos, João Jorge R. Damasceno and Fábio O. Arouca
Oil & Gas Sciences and Technology – Revue d’IFP Energies nouvelles 73 10 (2018)
https://doi.org/10.2516/ogst/2018007

Comparative study on the structures and properties of organo-montmorillonite and organo-palygorskite in oil-based drilling fluids

Guanzheng Zhuang, Zepeng Zhang, Maguy Jaber, Jiahua Gao and Shanmao Peng
Journal of Industrial and Engineering Chemistry 56 248 (2017)
https://doi.org/10.1016/j.jiec.2017.07.017

Oil Based Drilling Fluid Waste: An Overview on Environmentally Persistent Pollutants

Shohel Siddique, Lorraine Kwoffie, Kofi Addae-Afoakwa, Kyari Yates and James Njuguna
IOP Conference Series: Materials Science and Engineering 195 012008 (2017)
https://doi.org/10.1088/1757-899X/195/1/012008

Hydrophobic silica nanoparticle-stabilized invert emulsion as drilling fluid for deep drilling

Maliheh Dargahi-Zaboli, Eghbal Sahraei and Behzad Pourabbas
Petroleum Science 14 (1) 105 (2017)
https://doi.org/10.1007/s12182-016-0135-0

Single stage filter cake removal of barite weighted water based drilling fluid

B.S. Ba geri, Mohamed Mahmoud, Abdulazeez Abdulraheem, et al.
Journal of Petroleum Science and Engineering 149 476 (2017)
https://doi.org/10.1016/j.petrol.2016.10.059

Modeling of Filter Cake Composition in Maximum Reservoir Contact and Extended Reach Horizontal Wells in Sandstone Reservoirs

Mohamed Mahmoud, Badr S. Bageri, Salaheldin Elkatatny and Saleh H. Al-Mutairi
Journal of Energy Resources Technology 139 (3) (2017)
https://doi.org/10.1115/1.4035022

Influence of pre-shearing on rheometric measurements of an oil-based drilling fluid

Rubens R. Fernandes, Diogo E. V. Andrade, Admilson T. Franco and Cezar O. R. Negrão
Rheologica Acta 56 (9) 743 (2017)
https://doi.org/10.1007/s00397-017-1027-y

Investigation of mud density and weighting materials effect on drilling fluid filter cake properties and formation damage

K.A. Fattah and A. Lashin
Journal of African Earth Sciences 117 345 (2016)
https://doi.org/10.1016/j.jafrearsci.2016.02.003

The structure and rheology of organo-montmorillonite in oil-based system aged under different temperatures

Guanzheng Zhuang, Zepeng Zhang, Jinlong Sun and Libing Liao
Applied Clay Science 124-125 21 (2016)
https://doi.org/10.1016/j.clay.2016.01.051

Correlation between the gel–liquid transition stress and the storage modulus of an oil-based drilling fluid

Rubens R. Fernandes, Diogo E.V. Andrade, Admilson T. Franco and Cezar O.R. Negrão
Journal of Non-Newtonian Fluid Mechanics 231 6 (2016)
https://doi.org/10.1016/j.jnnfm.2016.02.003

The Effects of Particle Size and Viscosity on Settling Behaviour and Rheological Performance of Isopropyl Laurate Drilling Fluid

Shafikah Abdullah, Azlinda Azizi, Effah Yahya, et al.
Advanced Materials Research 1113 161 (2015)
https://doi.org/10.4028/www.scientific.net/AMR.1113.161

Influence of drilling mud rheology on the reduction of vertical vibrations in deep rotary drilling

Agata Guzek, Igor Shufrin, Elena Pasternak and Arcady V. Dyskin
Journal of Petroleum Science and Engineering 135 375 (2015)
https://doi.org/10.1016/j.petrol.2015.09.016

Aluminosilicate and aluminosilicate based polymer composites: Present status, applications and future trends

A.C. Lopes, P. Martins and S. Lanceros-Mendez
Progress in Surface Science 89 (3-4) 239 (2014)
https://doi.org/10.1016/j.progsurf.2014.08.002

The Remediation of Waste Drilling Muds by a Combined Plant-microbe System

Y.-Y. Fan, G.-C. Wang, J.-H. Fu and X.-H. Zheng
Petroleum Science and Technology 32 (17) 2086 (2014)
https://doi.org/10.1080/10916466.2011.645101

Magnetic resonance imaging in laboratory petrophysical core analysis

J. Mitchell, T.C. Chandrasekera, D.J. Holland, L.F. Gladden and E.J. Fordham
Physics Reports 526 (3) 165 (2013)
https://doi.org/10.1016/j.physrep.2013.01.003

Effects of carbon ash on rheological properties of water-based drilling fluids

Xianghai Meng, Yihe Zhang, Fengshan Zhou and Paul K. Chu
Journal of Petroleum Science and Engineering 100 1 (2012)
https://doi.org/10.1016/j.petrol.2012.11.011

The Influence of Low Molecular Weight Polymer on the Rheological Behavior of Bentonite Suspensions

M. Gareche, N. Zeraibi, A. Allal and M. Amoura
Petroleum Science and Technology 30 (19) 1981 (2012)
https://doi.org/10.1080/10916466.2011.555340

High Pressure Mixing Rheology of Drilling Fluids

J. Hermoso, B. D. Jofore, F. J. Martínez-Boza and C. Gallegos
Industrial & Engineering Chemistry Research 51 (44) 14399 (2012)
https://doi.org/10.1021/ie301835y

Bioremediation of waste drilling fluid: comparison of biostimulation and bioaugmentation

You-Yu Fan, Guang-Cai Wang, Jian-Hua Fu and Xing-Hua Zheng
Desalination and Water Treatment 48 (1-3) 329 (2012)
https://doi.org/10.1080/19443994.2012.698838

Shear rejuvenation, aging and shear banding in yield stress fluids

Andreas N. Alexandrou, Nicholas Constantinou and Georgios Georgiou
Journal of Non-Newtonian Fluid Mechanics 158 (1-3) 6 (2009)
https://doi.org/10.1016/j.jnnfm.2009.01.005

Flow and thixotropy of non-contaminating oil drilling fluids formulated with bentonite and sodium carboxymethyl cellulose

M. Dolz, J. Jiménez, M. Jesús Hernández, J. Delegido and A. Casanovas
Journal of Petroleum Science and Engineering 57 (3-4) 294 (2007)
https://doi.org/10.1016/j.petrol.2006.10.008