A Model for the Thermal Performance of Thick Composite Laminates in Hydrocarbon Fires
Rev. Inst. Fr. Pét., 50 1 (1995) 69-74
Published online: 2006-11-01
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Effect of temperature on tensile, compressive, and shear strengths of composites
Victor BirmanJournal of Thermal Stresses 1 (2025)
https://doi.org/10.1080/01495739.2025.2485471
Thermal diffusivity of carbon/phenolic composites exposed to harsh hyperthermal environments: theoretical assessment and experimental protocol
Maurizio Natali, Luigi Torre, Michele Buconi and Marco RalliniPolymer Degradation and Stability 234 111245 (2025)
https://doi.org/10.1016/j.polymdegradstab.2025.111245
Comparison of the Tensile Behavior of Carbon Fibers Reinforced Laminates Exposed to Fire Conditions
J. Vacandare, B. Vieille, S. Patel, C. Naejus and M. DenizeFire Technology (2025)
https://doi.org/10.1007/s10694-025-01765-3
Review of fracture characterization by delamination and debonding of polymer composite materials and bonded interfaces subjected to high temperature
J. P. Márquez CostaMechanics of Advanced Materials and Structures 1 (2025)
https://doi.org/10.1080/15376494.2025.2466075
In situ compressive behavior of carbon fibers reinforced PolyEtherEther Ketone laminates exposed to one-sided heat flux
Benoit Vieille and Alexis CoppalleJournal of Composite Materials 58 (15) 1737 (2024)
https://doi.org/10.1177/00219983241248754
Evaluation of the Thermal Diffusivity of Carbon/Phenolic Composites (CPCs) through Oxy-Acetylene Torch (OAT) Test—Part 1: Experimental Characterization and Preliminary Validation
Maurizio Natali, Luigi Torre and Marco RalliniPolymers 16 (5) 577 (2024)
https://doi.org/10.3390/polym16050577
5 (2023)
https://doi.org/10.1117/12.2678922
Pyrolysis Kinetics Analysis and Prediction for Carbon Fiber-Reinforced Epoxy Composites
Pei Xiao, Jingyi Zhang, Han Li, Haolei Mou, Zhenyu Feng and Jiang XiePolymers 15 (23) 4533 (2023)
https://doi.org/10.3390/polym15234533
Meso-structure-based thermomechanical modelling of thermoplastic-based laminates subjected to combined mechanical loading and severe thermal gradients
Yann Carpier, Benoit Vieille, Fabrice Barbe and Alexis CoppalleComposites Part A: Applied Science and Manufacturing 162 107165 (2022)
https://doi.org/10.1016/j.compositesa.2022.107165
Thermo-mechanical analysis of laminated composites shells exposed to fire
R. Pacheco-Blazquez, D. Di Capua, J. García-Espinosa, O. Casals and T. HakkarainenEngineering Structures 253 113679 (2022)
https://doi.org/10.1016/j.engstruct.2021.113679
Towards the Prediction of Sandwich Composites Durability in Severe Condition of Temperature: A New Numerical Model Describing the Influence of Material Water Content during a Fire Scenario
Juan Pablo Márquez Costa, Vincent Legrand, Sylvain Fréour and Frédéric JacqueminMaterials 13 (23) 5420 (2020)
https://doi.org/10.3390/ma13235420
Simulation of Thermal Behavior of Glass Fiber/Phenolic Composites Exposed to Heat Flux on One Side
Han Li, Nasidan Wang, Xuefei Han, et al.Materials 13 (2) 421 (2020)
https://doi.org/10.3390/ma13020421
Durability of Composite Materials under Severe Temperature Conditions: Influence of Moisture Content and Prediction of Thermo-Mechanical Properties During a Fire
Juan Pablo Márquez Costa, Vincent Legrand and Sylvain FréourJournal of Composites Science 3 (2) 55 (2019)
https://doi.org/10.3390/jcs3020055
Advances in Ablative Composites of Carbon Based Materials: A Review
Colonel Vijay Kumar and Balasubramanian KandasubramanianIndustrial & Engineering Chemistry Research 58 (51) 22663 (2019)
https://doi.org/10.1021/acs.iecr.9b04625
Durability of sandwich composites under extreme conditions: Towards the prediction of fire resistance properties based on thermo-mechanical measurements
Georgio Rizk, Vincent Legrand, Khaled Khalil, Pascal Casari and Frédéric JacqueminComposite Structures 186 233 (2018)
https://doi.org/10.1016/j.compstruct.2017.12.009
A review of flammability of natural fibre reinforced polymeric composites
N.K. Kim, S. Dutta and D. BhattacharyyaComposites Science and Technology 162 64 (2018)
https://doi.org/10.1016/j.compscitech.2018.04.016
Effects of simultaneous compression and one-sided heat flux on the time to failure of carbon fiber-reinforced polymer composites
D Swanson and J WolfrumJournal of Composite Materials 52 (13) 1809 (2018)
https://doi.org/10.1177/0021998317734392
Influence of out‐of‐plane fiber orientation on reaction‐to‐fire properties of carbon fiber reinforced polymer matrix composites
S. Eibl and D. SwansonFire and Materials 42 (2) 234 (2018)
https://doi.org/10.1002/fam.2484
Mechanical behavior of carbon fibers polyphenylene sulfide composites exposed to radiant heat flux and constant compressive force
Y. Carpier, B. Vieille, M.A. Maaroufi, A. Coppalle and F. BarbeComposite Structures 200 1 (2018)
https://doi.org/10.1016/j.compstruct.2018.05.086
Time to failure modeling of carbon fiber reinforced polymer composites subject to simultaneous tension and one-sided heat flux
D Swanson and J WolfrumJournal of Composite Materials 52 (18) 2503 (2018)
https://doi.org/10.1177/0021998317749711
Modeling thermal response of polymer composite hydrogen cylinders subjected to external fires
Z.S. Saldi and J.X. WenInternational Journal of Hydrogen Energy 42 (11) 7513 (2017)
https://doi.org/10.1016/j.ijhydene.2016.06.108
Two-Dimensional Modeling of Thermomechanical Responses of Rectangular GFRP Profiles Exposed to Fire
Lingfeng Zhang, Weiqing Liu, Guoqing Sun, Lu Wang and Lingzhi LiAdvances in Materials Science and Engineering 2017 1 (2017)
https://doi.org/10.1155/2017/1705915
Advanced High Strength Natural Fibre Composites in Construction
M. Fan, A. Naughton and J. BregullaAdvanced High Strength Natural Fibre Composites in Construction 375 (2017)
https://doi.org/10.1016/B978-0-08-100411-1.00014-5
Modelling Behaviour of a Carbon Epoxy Composite Exposed to Fire: Part II—Comparison with Experimental Results
Pauline Tranchard, Fabienne Samyn, Sophie Duquesne, Bruno Estèbe and Serge BourbigotMaterials 10 (5) 470 (2017)
https://doi.org/10.3390/ma10050470
Multi-layer polymer metal laminates for the fire protection of lightweight structures
S. Christke, A.G. Gibson, K. Grigoriou and A.P. MouritzMaterials & Design 97 349 (2016)
https://doi.org/10.1016/j.matdes.2016.02.105
Ablation modeling of state of the art EPDM based elastomeric heat shielding materials for solid rocket motors
Maurizio Natali, Ivan Puri, Marco Rallini, Josè Kenny and Luigi TorreComputational Materials Science 111 460 (2016)
https://doi.org/10.1016/j.commatsci.2015.09.050
Ionic liquid microseeded WC/RF ablative composite for heat shielding
Deepankar Sri Gyan and Balasubramanian K.RSC Advances 6 (69) 65152 (2016)
https://doi.org/10.1039/C6RA09285C
Comparative assessment of the fire structural performance of carbon-epoxy composite and aluminium alloy used in aerospace structures
K. Grigoriou and A.P. MouritzMaterials & Design 108 699 (2016)
https://doi.org/10.1016/j.matdes.2016.07.018
Reference Module in Materials Science and Materials Engineering
A.G. Gibson and S. ArunReference Module in Materials Science and Materials Engineering (2016)
https://doi.org/10.1016/B978-0-12-803581-8.03968-0
An experimental method to assess the thermo-mechanical damage of CFRP subjected to a highly energetic 1.07 μm-wavelength laser irradiation
Vadim Allheily, Fabrice Lacroix, Alfred Eichhorn, et al.Composites Part B: Engineering 92 326 (2016)
https://doi.org/10.1016/j.compositesb.2016.02.024
Effect of nanopaper coating on flexural properties of a fire-treated glass fiber reinforced polyester composite
Jamie D Skovron, Jinfeng Zhuge, Jihua Gou and Ali P GordonJournal of Composite Materials 50 (28) 3995 (2016)
https://doi.org/10.1177/0021998316630584
Hybrid caged nanostructure ablative composites of octaphenyl-POSS/RF as heat shields
Rohit Gupta and Balasubramanian KandasubramanianRSC Advances 5 (12) 8757 (2015)
https://doi.org/10.1039/C4RA10905H
Hybrid Carbon-Carbon Ablative Composites for Thermal Protection in Aerospace
P. Sanoj and Balasubramanian KandasubramanianJournal of Composites 2014 1 (2014)
https://doi.org/10.1155/2014/825607
Tension modelling and testing of sandwich composites in fire
A. Anjang, V.S. Chevali, E. Kandare, A.P. Mouritz and S. FeihComposite Structures 113 437 (2014)
https://doi.org/10.1016/j.compstruct.2014.03.016
Effect of flame heat flux on thermal response and fire properties of char‐forming composite materials
Ziqing Yu and Aixi ZhouFire and Materials 38 (1) 100 (2014)
https://doi.org/10.1002/fam.2166
Modelling decomposition and fire behaviour of small samples of a glass‐fibre‐reinforced polyester/balsa‐cored sandwich material
Damien M. Marquis, Michel Pavageau, Eric Guillaume and Carine Chivas‐JolyFire and Materials 37 (6) 413 (2013)
https://doi.org/10.1002/fam.2136
Multi-scale simulations of fire growth on a sandwich composite structure
Damien M Marquis, Michel Pavageau and Eric GuillaumeJournal of Fire Sciences 31 (1) 3 (2013)
https://doi.org/10.1177/0734904112453010
Finite difference analysis of thermal response and post-fire flexural degradation of glass fiber reinforced composites coated with carbon nanofiber based nanopapers
Jinfeng Zhuge, Jihua Gou, Ruey-Hung Chen and Jay KapatComposites Part A: Applied Science and Manufacturing 43 (12) 2278 (2012)
https://doi.org/10.1016/j.compositesa.2012.07.022
Predicting compression failure of composite laminates in fire
P.T. Summers, B.Y. Lattimer, S. Case and S. FeihComposites Part A: Applied Science and Manufacturing 43 (5) 773 (2012)
https://doi.org/10.1016/j.compositesa.2012.02.003
Failure Mechanisms in Polymer Matrix Composites
P. GuFailure Mechanisms in Polymer Matrix Composites 79 (2012)
https://doi.org/10.1533/9780857095329.1.79
Numerical simulation of expansion and charring of carbon-epoxy laminates in fire environments
Matthew T. McGurn, Paul E. DesJardin and Amanda B. DoddInternational Journal of Heat and Mass Transfer 55 (1-3) 272 (2012)
https://doi.org/10.1016/j.ijheatmasstransfer.2011.09.013
Finite element modeling of post-fire flexural modulus of fiber reinforced polymer composites under constant heat flux
Jinfeng Zhuge, Jihua Gou, Ruey-Hung Chen and Jay KapatComposites Part A: Applied Science and Manufacturing 43 (4) 665 (2012)
https://doi.org/10.1016/j.compositesa.2011.12.023
1 (2012)
https://doi.org/10.1002/9781118097298.weoc181
(2012)
https://doi.org/10.2514/6.2012-1143
Fire structural modelling of fibre–polymer laminates protected with an intumescent coating
E. Kandare, G.J. Griffin, S. Feih, et al.Composites Part A: Applied Science and Manufacturing 43 (5) 793 (2012)
https://doi.org/10.1016/j.compositesa.2011.05.012
Compressive Response of Composites Under Combined Fire and Compression Loading
Liu Liu, John W. Holmes, George A. Kardomateas and Victor BirmanFire Technology 47 (4) 985 (2011)
https://doi.org/10.1007/s10694-009-0123-7
Recent Advances in Mechanics
George A. KardomateasRecent Advances in Mechanics 207 (2011)
https://doi.org/10.1007/978-94-007-0557-9_12
Hybrid Progressive Damage Prediction Model for Loaded Marine Sandwich Composite Structures Subjected to a Fire
James LuaFire Technology 47 (4) 851 (2011)
https://doi.org/10.1007/s10694-009-0124-6
Fiber-reinforced epoxy composites exposed to high temperature environments. Part II: modeling mechanical property degradation
Everson Kandare, Baljinder K. Kandola, Edward D. McCarthy, Peter Myler, Gerard Edwards, Yong Jifeng and Yong C. WangJournal of Composite Materials 45 (14) 1511 (2011)
https://doi.org/10.1177/0021998310385024
Mechanical Property Degradation of Naval Composite Materials
A. P. Mouritz, S. Feih, Z. Mathys and A. G. GibsonFire Technology 47 (4) 913 (2011)
https://doi.org/10.1007/s10694-009-0125-5
Thermal and kinetic characterization of a toughened epoxy resin reinforced with carbon fibers
Carmen Branca, Colomba Di Blasi, Antonio Galgano and Eva MilellaThermochimica Acta 517 (1-2) 53 (2011)
https://doi.org/10.1016/j.tca.2011.01.034
Fire protection systems for building floors made of pultruded GFRP profiles – Part 2: Modeling of thermomechanical responses
Yu Bai, Thomas Keller, João R. Correia, Fernando A. Branco and João G. FerreiraComposites Part B: Engineering 41 (8) 630 (2010)
https://doi.org/10.1016/j.compositesb.2010.09.019
Fire Structural Modeling of Polymer Composites with Passive Thermal Barrier
S. Feih, A.P. Mouritz, Z. Mathys and A.G. GibsonJournal of Fire Sciences 28 (2) 141 (2010)
https://doi.org/10.1177/0734904109340878
Temperature inside burning polymer specimens: Pyrolysis zone and shielding
B. Schartel and A. WeißFire and Materials 34 (5) 217 (2010)
https://doi.org/10.1002/fam.1007
Thermal response to fire of a fibre-reinforced sandwich panel: Model formulation, selection of intrinsic properties and experimental validation
Antonio Galgano, Colomba Di Blasi, Carmen Branca and Eva MilellaPolymer Degradation and Stability 94 (8) 1267 (2009)
https://doi.org/10.1016/j.polymdegradstab.2009.04.007
Review of fire structural modelling of polymer composites
A.P. Mouritz, S. Feih, E. Kandare, et al.Composites Part A: Applied Science and Manufacturing 40 (12) 1800 (2009)
https://doi.org/10.1016/j.compositesa.2009.09.001
Structural stability of polymer matrix composite panels in fire
Pei Gu, Ming Dao and R.J. AsaroMarine Structures 22 (3) 354 (2009)
https://doi.org/10.1016/j.marstruc.2009.04.001
Engineering Against Fracture
A. E. Elmughrabi, A. M. Robinson and A. G. GibsonEngineering Against Fracture 137 (2009)
https://doi.org/10.1007/978-1-4020-9402-6_12
Integrity of composite aircraft fuselage materials under crash fire conditions
G. La Delfa, J. W. Luinge and A. G. GibsonPlastics, Rubber and Composites 38 (2-4) 111 (2009)
https://doi.org/10.1179/174328909X387900
(2009)
https://doi.org/10.2514/6.2009-2553
Engineering Against Fracture
Gaetano La Delfa, Johannes Luinge and Arthur Geoff GibsonEngineering Against Fracture 169 (2009)
https://doi.org/10.1007/978-1-4020-9402-6_14
Structural Integrity of Composite Columns Subject to Fire
George A. Kardomateas, George J. Simitses and Victor BirmanJournal of Composite Materials 43 (9) 1015 (2009)
https://doi.org/10.1177/0021998308097733
Time Dependence of Material Properties of FRP Composites in Fire
YU Bai and Thomas KellerJournal of Composite Materials 43 (21) 2469 (2009)
https://doi.org/10.1177/0021998309344641
Modeling Compressive Skin Failure of Sandwich Composites in Fire
S. Feih, Z. Mathys, A.G. Gibson and A.P. MouritzJournal of Sandwich Structures & Materials 10 (3) 217 (2008)
https://doi.org/10.1177/1099636207082307
Modeling of thermal responses for FRP composites under elevated and high temperatures
Yu Bai, Till Vallée and Thomas KellerComposites Science and Technology 68 (1) 47 (2008)
https://doi.org/10.1016/j.compscitech.2007.05.039
Finite Element Modeling of Composite Hydrogen Cylinders in Localized Flame Impingements
J. Hu, J. Chen, K. Chandrashekhara and William ChernicoffSAE International Journal of Passenger Cars - Mechanical Systems 1 (1) 577 (2008)
https://doi.org/10.4271/2008-01-0723
Modelling the compression strength of polymer laminates in fire
S. Feih, Z. Mathys, A.G. Gibson and A.P. MouritzComposites Part A: Applied Science and Manufacturing 38 (11) 2354 (2007)
https://doi.org/10.1016/j.compositesa.2007.04.013
Tensile Strength Modeling of Glass Fiber—Polymer Composites in Fire
S. Feih, A.P. Mouritz, Z. Mathys and A.G. GibsonJournal of Composite Materials 41 (19) 2387 (2007)
https://doi.org/10.1177/0021998307075461
Modelling the tension and compression strengths of polymer laminates in fire
S. Feih, Z. Mathys, A.G. Gibson and A.P. MouritzComposites Science and Technology 67 (3-4) 551 (2007)
https://doi.org/10.1016/j.compscitech.2006.07.038
A temperature and mass dependent thermal model for fire response prediction of marine composites
James Lua, Jeff O'Brien, Christopher T. Key, Yongshu Wu and Brian Y. LattimerComposites Part A: Applied Science and Manufacturing 37 (7) 1024 (2006)
https://doi.org/10.1016/j.compositesa.2005.01.034
(2006)
https://doi.org/10.2514/6.2006-1840
Structural response of liquid-cooled GFRP slabs subjected to fire – Part II: Thermo-chemical and thermo-mechanical modeling
Thomas Keller, Craig Tracy and Aixi ZhouComposites Part A: Applied Science and Manufacturing 37 (9) 1296 (2006)
https://doi.org/10.1016/j.compositesa.2005.08.007
Laminate Theory Analysis of Composites under Load in Fire
A. G. Gibson, Y. -S. Wu, J. T. Evans and A. P. MouritzJournal of Composite Materials 40 (7) 639 (2006)
https://doi.org/10.1177/0021998305055543
Fire Properties of Polymer Composite Materials
Solid Mechanics and Its Applications, Fire Properties of Polymer Composite Materials 143 215 (2006)https://doi.org/10.1007/978-1-4020-5356-6_7
The Integrity of Polymer Composites during and after Fire
A. G. Gibson, P. N. H. Wright, Y. -S. Wu, A. P. Mouritz, Z. Mathys and C. P. GardinerJournal of Composite Materials 38 (15) 1283 (2004)
https://doi.org/10.1177/0021998304042733
https://doi.org/10.1002/9780470690253.ch5
Computational Fluid and Solid Mechanics
M.R.E. LooyehComputational Fluid and Solid Mechanics 1299 (2001)
https://doi.org/10.1016/B978-008043944-0/50901-X
Thermochemical responses of sandwich panels to fire
M.R.E. Looyeh, K. Rados and P. BettessFinite Elements in Analysis and Design 37 (11) 913 (2001)
https://doi.org/10.1016/S0168-874X(01)00075-0
Comprehensive Composite Materials
A.G. GibsonComprehensive Composite Materials 459 (2000)
https://doi.org/10.1016/B0-08-042993-9/00115-7
Fire behaviour of composite laminates
N. Dodds, A.G. Gibson, D. Dewhurst and J.M. DaviesComposites Part A: Applied Science and Manufacturing 31 (7) 689 (2000)
https://doi.org/10.1016/S1359-835X(00)00015-4
A finite element model for the fire-performance of GRP panels including variable thermal properties
M.R.E. Looyeh and P. BettessFinite Elements in Analysis and Design 30 (4) 313 (1998)
https://doi.org/10.1016/S0168-874X(98)00036-5
A one‐dimensional finite element simulation for the fire‐performance of GRP panels for offshore structures
M.R.E. Looyeh, P. Bettess and A.G. GibsonInternational Journal of Numerical Methods for Heat & Fluid Flow 7 (6) 609 (1997)
https://doi.org/10.1108/09615539710170781