Mechanical Degradation Onset of Polyethylene Oxide Used as a Hydrosoluble Model Polymer for Enhanced Oil Recovery
Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles, 67 6 (2012) 931-940
Published online: 2013-02-06
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Capillary wave-assisted collapse of non-Newtonian droplets
Ziwen He, Huy Tran and Min Y. PackPhysics of Fluids 36 (9) (2024)
https://doi.org/10.1063/5.0231029
Experimental study on the mechanical degradation of partially hydrolyzed polyacrylamide in pore throats
Jirui Zou, Xiangan Yue, Lijuan Zhang, Shengxu Zhao and Minglu ShaoJournal of Dispersion Science and Technology 1 (2024)
https://doi.org/10.1080/01932691.2024.2397357
Compact Viscosity Sensors for Downhole Enhanced Oil Recovery Polymer Fluid Degradation Monitoring
Miguel Gonzalez, Subhash Ayirala, Lyla Maskeen and Abdulkareem AlSofiSPE Journal 29 (06) 3187 (2024)
https://doi.org/10.2118/209430-PA
Using microfluidics to assess the elongational behavior of low concentration Carbopol solutions upon addition of polyethylene oxide
Andrea Iginio Cirillo, Fabiana Gallo, Emanuela Longo, Jan Claussen, Stefano Guido and Giovanna TomaiuoloPhysics of Fluids 36 (10) (2024)
https://doi.org/10.1063/5.0230541
Study on polymer mechanical degradation in core plugs versus in capillary tubes
Dongqing Cao, Ming Han, Zhenpeng Leng and Jinxun WangJournal of Petroleum Exploration and Production Technology 13 (1) 111 (2023)
https://doi.org/10.1007/s13202-022-01539-5
Investigating the effect of insoluble additives type on the drag reduction performance in a crude oil turbulent flow system
Wafaa Kamil Mahmood, Hayder A. Abdulbari and Asaad H. LaftActa Innovations (43) 44 (2022)
https://doi.org/10.32933/ActaInnovations.43.4
Experimental Investigation of Polyethylene Oxide Polymer Solutions for Enhanced Oil Recovery in Low-Permeability Carbonate Rocks
Miguel Mejía, Gary A. Pope, Haofeng Song and Matthew T. BalhoffSPE Journal 27 (02) 929 (2022)
https://doi.org/10.2118/208595-PA
(2022)
https://doi.org/10.2118/209430-MS
(2022)
https://doi.org/10.2118/210014-MS
Mechanical Degradation of Biopolymers for Enhanced Oil Recovery Applications
Vitor Hugo Ferreira, Karl Clinckspoor, Alane Vermelho, Veronica Cardoso and Rosangela MorenoSPE Journal 27 (04) 2052 (2022)
https://doi.org/10.2118/209579-PA
Fabrications and Applications of Micro/Nanofluidics in Oil and Gas Recovery: A Comprehensive Review
Junchen Liu, Yandong Zhang, Mingzhen Wei, Xiaoming He and Baojun BaiEnergy & Fuels 36 (17) 9904 (2022)
https://doi.org/10.1021/acs.energyfuels.2c01943
Scaling of Mechanical Degradation of EOR Polymers: From Field-Scale Chokes to Capillary Tubes
Arne Stavland, Siv Marie Åsen, Amare Mebratu and Flavien GathierSPE Production & Operations 36 (01) 43 (2021)
https://doi.org/10.2118/202478-PA
Investigating the flow behavior of dilute aloe vera biopolymer solutions in microchannel
Fiona W.M Ling, Hayder A. Abdulbari, Wafaa A. Kadhum and J.T. HengChemical Engineering Communications 208 (5) 753 (2021)
https://doi.org/10.1080/00986445.2020.1742115
How to make a giant bubble
Stephen Frazier, Xinyi Jiang and Justin C. BurtonPhysical Review Fluids 5 (1) (2020)
https://doi.org/10.1103/PhysRevFluids.5.013304
Real structure micromodels based on reservoir rocks for enhanced oil recovery (EOR) applications
Calvin Lumban Gaol, Jonas Wegner and Leonhard GanzerLab on a Chip 20 (12) 2197 (2020)
https://doi.org/10.1039/D0LC00257G
Thermal Stability and Compatibility of Surfactants in Presence of Formation Water Salinity under Reservoir Conditions
Muhammad Khan Memon, Ubedullah Ansari and Habib U Zaman MemonMehran University Research Journal of Engineering and Technology 39 (4) 826 (2020)
https://doi.org/10.22581/muet1982.2004.15
Scission of flexible polymers in contraction flow: Predicting the effects of multiple passages
Sandeep Garrepally, Stephane Jouenne, Peter D. Olmsted and Francois LequeuxJournal of Rheology 64 (3) 601 (2020)
https://doi.org/10.1122/1.5127801
Correlation of Mobility Reduction of HPAM Solutions at High Velocity in Porous Medium with Ex-Situ Measurements of Elasticity
Stephane Jouenne and Guillaume HeurteuxSPE Journal 25 (01) 465 (2020)
https://doi.org/10.2118/198899-PA
Hydrophobically associating polymers for enhanced oil recovery – Part B: A review of modelling approach to flow in porous media
Richard O. Afolabi, Gbenga F. Oluyemi, Simon Officer and Johnson O. UgwuJournal of Molecular Liquids 293 111495 (2019)
https://doi.org/10.1016/j.molliq.2019.111495
(2019)
https://doi.org/10.2118/198132-MS
Polymer Mechanochemistry: Manufacturing Is Now a Force to Be Reckoned With
Niamh Willis-Fox, Etienne Rognin, Talal A. Aljohani and Ronan DalyChem 4 (11) 2499 (2018)
https://doi.org/10.1016/j.chempr.2018.08.001
Experimental investigation using an acrylamide-based polymer with emulsifying capability for enhanced oil recovery: A preliminary study
Xingguang Xu, Jian Ouyang, Yuanyuan Wang and Chao WangJournal of Industrial and Engineering Chemistry 57 134 (2018)
https://doi.org/10.1016/j.jiec.2017.06.055
Polymer Stability After Successive Mechanical-Degradation Events
Stéphane Jouenne, Hafssa Chakibi and David LevittSPE Journal 23 (01) 018 (2018)
https://doi.org/10.2118/186103-PA
Carbon dioxide/water foams stabilized with a zwitterionic surfactant at temperatures up to 150 °C in high salinity brine
Chang Da, Shehab Alzobaidi, Guoqing Jian, Leilei Zhang, Sibani L. Biswal, George J. Hirasaki and Keith P. JohnstonJournal of Petroleum Science and Engineering 166 880 (2018)
https://doi.org/10.1016/j.petrol.2018.03.071
A model for non-Newtonian flow in porous media at different flow regimes
Arild Lohne, Oddbjørn Nødland, Arne Stavland and Aksel HiorthComputational Geosciences 21 (5-6) 1289 (2017)
https://doi.org/10.1007/s10596-017-9692-6
Experimental investigation using an acrylamide-based polymer with emulsifying capability for enhanced oil recovery: A preliminary study
Xingguang Xu, Jian Ouyang, Yuanyuan Wang and Chao WangJournal of Industrial and Engineering Chemistry 55 110 (2017)
https://doi.org/10.1016/j.jiec.2017.06.034
Polymeric Drift Control Adjuvants for Agricultural Spraying
Reece W. Lewis, Richard A. Evans, Nino Malic, Kei Saito and Neil R. CameronMacromolecular Chemistry and Physics 217 (20) 2223 (2016)
https://doi.org/10.1002/macp.201600139
Microfluidics: an enabling screening technology for enhanced oil recovery (EOR)
Victor A. LiftonLab on a Chip 16 (10) 1777 (2016)
https://doi.org/10.1039/C6LC00318D
Activation Thermodynamics and Concentration Scaling of the Viscosity of Unimeric and Aggregated Poloxamer EO93PO54EO93 in Water
François QuirionMacromolecules 48 (23) 8629 (2015)
https://doi.org/10.1021/acs.macromol.5b02247
(2015)
https://doi.org/10.2118/174611-MS
Well testing interpretation method and application in triple-layer reservoirs by polymer flooding
H. Yu, Ke Pan, S. Li, et al.Materialwissenschaft und Werkstofftechnik 46 (11) 1133 (2015)
https://doi.org/10.1002/mawe.201400378
(2014)
https://doi.org/10.2118/169699-MS
Laboratory Study on the Potential EOR Use of HPAM/VES Hybrid in High‐Temperature and High‐Salinity Oil Reservoirs
Dingwei Zhu, Jichao Zhang, Yugui Han, Hongyan Wang, Yujun Feng and Ibnelwaleed Ali HussienJournal of Chemistry 2013 (1) (2013)
https://doi.org/10.1155/2013/927519