Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Methanol fuelling of a spark-ignition engine: Experiments and 0D/1D predictive modelling for combustion, performance, and emissions

Stefania Esposito, Enrica Malfi, Massimiliano De Felice, Dominik Golc, Joachim Beeckmann, Heinz Pitsch and Vincenzo De Bellis
Fuel 393 134657 (2025)
https://doi.org/10.1016/j.fuel.2025.134657

Impact of intake valve modulation on engine efficiency and emissions in a stoichiometric spark-ignition natural gas engine at low and mid loads

Adil M. Shaikh, Doni M. Thomas, Benjamin S. Mathews, Gregory M. Shaver, Eric Holloway, Dheeraj Gosala and Timothy Shipp
Energy Conversion and Management 339 119893 (2025)
https://doi.org/10.1016/j.enconman.2025.119893

Effect of first-stage ignition on the onset of knocking in SI engines

Rafael Meier, Augusto Finger Pacheco, Leonel R Cancino and Amir AM Oliveira
International Journal of Engine Research 25 (1) 65 (2024)
https://doi.org/10.1177/14680874231193207

Knock Prediction Improvement with Application to the Analysis of Knock Mitigation with Targeted Water Injection in SI Engines

Feifan Ji, Shuo Meng and Zhiyu Han
Combustion Science and Technology 1 (2024)
https://doi.org/10.1080/00102202.2024.2323572

Advanced turbulence and combustion modeling for the study of a swirl-assisted natural gas spark-ignition heavy-duty engine

Marco Riccardi, Vincenzo De Bellis, Lorenzo Sforza, Carlo Beatrice, Fabio Bozza and Mohsen Mirzaeian
International Journal of Engine Research 24 (8) 3400 (2023)
https://doi.org/10.1177/14680874221150469

LESS Spark Ignition Engine: An Innovative Alternative to the Crankshaft Mechanism

Vasileios Georgitzikis, Dionisis Pettas, Konstantinos Loukas and Georgios Mavropoulos
Energies 16 (18) 6655 (2023)
https://doi.org/10.3390/en16186655

In-cylinder thermographic PIV combined with phosphor thermometry using ZnO:Zn

Andreas Kopf, Valerio Frattina, Michele Bardi, Torsten Endres, Gilles Bruneaux and Christof Schulz
International Journal of Engine Research 24 (1) 113 (2023)
https://doi.org/10.1177/14680874211048559

Knock and knock intensity models for boosted SI conditions with gasoline-ethanol blends

George Lavoie, Robert Middleton, Jason Martz and Paul Blumberg
International Journal of Engine Research 24 (2) 521 (2023)
https://doi.org/10.1177/14680874211055351

Numerical analysis of the effects of port water injection in a downsized SI engine at partial and full load operation

Davide Lanni, Enzo Galloni and Gustavo Fontana
Applied Thermal Engineering 205 118060 (2022)
https://doi.org/10.1016/j.applthermaleng.2022.118060

Assessment of the Operation of an SI Engine Fueled with Ammonia

Davide Lanni, Enzo Galloni, Gustavo Fontana and Gabriele D’Antuono
Energies 15 (22) 8583 (2022)
https://doi.org/10.3390/en15228583

Performance Estimation of a Downsized SI Engine Running with Hydrogen

Enzo Galloni, Davide Lanni, Gustavo Fontana, Gabriele D’Antuono and Simone Stabile
Energies 15 (13) 4744 (2022)
https://doi.org/10.3390/en15134744

Thermodynamic efficiency assessment of gasoline spark ignition and compression ignition operating strategies using a new multi-mode combustion model for engine system simulations

Elliott A Ortiz-Soto, George A Lavoie, Margaret S Wooldridge and Dennis N Assanis
International Journal of Engine Research 20 (3) 304 (2019)
https://doi.org/10.1177/1468087417752195

Exploring the potential of reformed-exhaust gas recirculation (R-EGR) for increased efficiency of methanol fueled SI engines

Duc-Khanh Nguyen, Louis Sileghem and Sebastian Verhelst
Fuel 236 778 (2019)
https://doi.org/10.1016/j.fuel.2018.09.073

Experimental Investigation and Modeling of Early Flame Propagation Stages in Operating Conditions Representative of Modern High Efficiency Spark Ignition Engines

Alessio Dulbecco, Gregory Font, Fabrice Foucher and Pierre BREQUIGNY
SAE International Journal of Advances and Current Practices in Mobility 2 (2) 567 (2019)
https://doi.org/10.4271/2019-24-0073

Charge Air Subcooling in a Diesel Engine via Refrigeration Unit – Effects on the Turbocharger Equilibrium

Diego Vittorini, Marco Di Bartolomeo, Davide Di Battista and Roberto Cipollone
Energy Procedia 148 822 (2018)
https://doi.org/10.1016/j.egypro.2018.08.115

Experimental and Numerical Analyses of a Spark-Ignition Engine Firing with N-Butanol-Gasoline Blends at High Load Operation

E. Galloni, G. Fontana and F. Scala
Energy Procedia 148 336 (2018)
https://doi.org/10.1016/j.egypro.2018.08.086

Study on pollutants formation under knocking combustion conditions using an optical single cylinder SI research engine

Apostolos Karvountzis-Kontakiotis, Hassan Vafamehr, Alasdair Cairns and Mark Peckham
Energy 158 899 (2018)
https://doi.org/10.1016/j.energy.2018.06.063

0D modeling aspects of flame stretch in spark ignition engines and comparison with experimental results

Sokratis Demesoukas, Pierre Brequigny, Christian Caillol, Fabien Halter and Christine Mounaïm-Rousselle
Applied Energy 179 401 (2016)
https://doi.org/10.1016/j.apenergy.2016.07.007

Scale-resolving simulations in engine combustion process design based on a systematic approach for model development

Christian Hasse
International Journal of Engine Research 17 (1) 44 (2016)
https://doi.org/10.1177/1468087415597842

Development of a Phenomenological Turbulence Model through a Hierarchical 1D/3D Approach Applied to a VVA Turbocharged Engine

Vincenzo De Bellis, Fabio Bozza, Stefano Fontanesi, Elena Severi and Fabio Berni
SAE International Journal of Engines 9 (1) 506 (2016)
https://doi.org/10.4271/2016-01-0545

Combustion, Performance and Emission Analysis of an Oxygen-Controlling Downsized SI Engine

J.X. Zhou, B. Moreau, C. Mounaïm-Rousselle and F. Foucher
Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles 71 (4) 49 (2016)
https://doi.org/10.2516/ogst/2015035

Investigation on the Potential of Quantitatively Predicting CCV in DI-SI Engines by Using a One-Dimensional CFD Physical Modeling Approach: Focus on Charge Dilution and In-Cylinder Aerodynamics Intensity

Alessio Dulbecco, Stephane Richard and Christian Angelberger
SAE International Journal of Engines 8 (5) 2012 (2015)
https://doi.org/10.4271/2015-24-2401

Invited Review: Development of a one-dimensional computational fluid dynamics modeling approach to predict cycle-to-cycle variability in spark-ignition engines based on physical understanding acquired from large-eddy simulation

Stéphane Richard, Alessio Dulbecco, Christian Angelberger and Karine Truffin
International Journal of Engine Research 16 (3) 379 (2015)
https://doi.org/10.1177/1468087414560592

Model-Based Control-Oriented Combustion Phasing Feedback for Fast CA50 Estimation

Qilun Zhu, Shu Wang, Robert Prucka, Michael Prucka and Hussein Dourra
SAE International Journal of Engines 8 (3) 997 (2015)
https://doi.org/10.4271/2015-01-0868

Quasi-dimensional analysis of combustion, emissions and knocking in a homogeneous GDI engine

J. Lee, Y. Lee, K. Y. Huh, H. Kwon and J. I. Park
International Journal of Automotive Technology 16 (5) 877 (2015)
https://doi.org/10.1007/s12239-015-0089-z

Near wall combustion modeling in spark ignition engines. Part A: Flame–wall interaction

Sokratis Demesoukas, Christian Caillol, Pascal Higelin, Andrei Boiarciuc and Alain Floch
Energy Conversion and Management 106 1426 (2015)
https://doi.org/10.1016/j.enconman.2015.09.061

A Model for Prediction of Knock in the Cycle Simulation by Detail Characterization of Fuel and Temperature Stratification

Darko Kozarac, Rudolf Tomic, Ivan Taritas, Jyh-Yuan Chen and Robert W. Dibble
SAE International Journal of Engines 8 (4) 1520 (2015)
https://doi.org/10.4271/2015-01-1245

A 1D/3D Methodology for the Prediction and Calibration of a High Performance Motorcycle SI Engine

Teodosio Luigi, Attilio Roberto and Nonatelli Fabio
Energy Procedia 82 936 (2015)
https://doi.org/10.1016/j.egypro.2015.11.842

Investigation of Cycle-to-Cycle Variability of NO in Homogeneous Combustion

A. Karvountzis-Kontakiotis and L. Ntziachristos
Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles 70 (1) 111 (2015)
https://doi.org/10.2516/ogst/2013199

Simulation of CO and NO emissions in a SI engine using a 0D coherent flame model coupled with a tabulated chemistry approach

S. Bougrine, S. Richard, J.-B. Michel and D. Veynante
Applied Energy 113 1199 (2014)
https://doi.org/10.1016/j.apenergy.2013.08.038

Fuel Composition Effects on Flame Stretch in Turbulent Premixed Combustion: Numerical Analysis of Flame-Vortex Interaction and Formulation of a New Efficiency Function

S. Bougrine, S. Richard, O. Colin and D. Veynante
Flow, Turbulence and Combustion 93 (2) 259 (2014)
https://doi.org/10.1007/s10494-014-9546-4

A 0-D flame wrinkling equation to describe the turbulent flame surface evolution in SI engines

Stéphane Richard and Denis Veynante
Comptes Rendus. Mécanique 343 (3) 219 (2014)
https://doi.org/10.1016/j.crme.2014.09.003

Knock in an Ethanol Fueled Spark Ignition Engine: Detection Methods with Cycle-Statistical Analysis and Predictions Using Different Auto-Ignition Models

Karel Steurs, Christopher Kim Blomberg and Konstantinos Boulouchos
SAE International Journal of Engines 7 (2) 568 (2014)
https://doi.org/10.4271/2014-01-1215

Hierarchical 1D/3D Approach for the Development of a Turbulent Combustion Model Applied to a VVA Turbocharged Engine. Part I: Turbulence Model

Vincenzo De Bellis, Elena Severi, Stefano Fontanesi and Fabio Bozza
Energy Procedia 45 829 (2014)
https://doi.org/10.1016/j.egypro.2014.01.088

LP EGR and IGR Compromise on a GDI Engine at Middle Load

Guillaume Bourhis, Jonathan Chauvin, Xavier Gautrot and Loic de Francqueville
SAE International Journal of Engines 6 (1) 67 (2013)
https://doi.org/10.4271/2013-01-0256

Experiments and zero D modeling studies using specific Wiebe coefficients for producer gas as fuel in spark-ignited engines

Anand M Shivapuji and S Dasappa
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 227 (3) 504 (2013)
https://doi.org/10.1177/0954406212463846

Quasidimensional Simulation with Multi-zone Combustion Model for Homogeneous GDI Engine Emissions and Knocking

Jaeseo Lee, Kang Y. Huh, Hyuckmo Kwon and Jae In Park
Journal of the Korean Society of Combustion 18 (1) 7 (2013)
https://doi.org/10.15231/jksc.2013.18.1.007

Control-oriented modelling of combustion phasing for a fuel-flexible spark-ignited engine with variable valve timing

Carrie M Hall, Gregory M Shaver, Jonathan Chauvin and Nicolas Petit
International Journal of Engine Research 13 (5) 448 (2012)
https://doi.org/10.1177/1468087412439019

Multi Attribute Optimization: Fuel Consumption, Emissions and Driveability

Kazuhiko Gotoh, Jerome Ceppi, Nicolas Sabatier and Yukisada Tsuchida
SAE International Journal of Passenger Cars - Mechanical Systems 5 (1) 688 (2012)
https://doi.org/10.4271/2012-01-0946

A laminar burning velocity and flame thickness correlation for ethanol–air mixtures valid at spark-ignition engine conditions

J. Vancoillie, J. Demuynck, J. Galle, S. Verhelst and J.A. van Oijen
Fuel 102 460 (2012)
https://doi.org/10.1016/j.fuel.2012.05.022

On the combination of complex chemistry with a 0-D coherent flame model to account for the fuel properties in spark ignition engines simulations: Application to methane-air-diluents mixtures

S. Bougrine, S. Richard and D. Veynante
Proceedings of the Combustion Institute 33 (2) 3123 (2011)
https://doi.org/10.1016/j.proci.2010.06.017

Validation and Application of a New 0D Flame/Wall Interaction Sub Model for SI Engines

Maria Rivas, Pascal Higelin, Christian Caillol, et al.
SAE International Journal of Engines 5 (3) 718 (2011)
https://doi.org/10.4271/2011-01-1893

Effects of Methane/Hydrogen Blends On Engine Operation: Experimental And Numerical Investigation of Different Combustion Modes

David Serrano, Olivier Laget, Dominique Soleri, et al.
SAE International Journal of Engines 3 (2) 223 (2010)
https://doi.org/10.4271/2010-01-2165