Table 2
Basic parameters used in numerical simulation.
| Single-porosity (1D flow) | |
| Grid dimensions | 12 × 1 × 1 |
| Grid spacing | x = 10, 1.5, 1.5, 3, 6, 13, 13, 6, 3, 1.5, 1.5, 10 cm |
| y = 50 cm | |
| z = 50 cm | |
| Single-porosity (2D flow) | |
| Grid dimensions | 12 × 12 × 1 |
| Grid spacing | x = 10, 1.5, 1.5, 3, 6, 13, 13, 6, 3, 1.5, 1.5, 10 cm |
| y = same as x | |
| z = 50 cm | |
| Single-porosity (3D flow) | |
| Grid dimensions | 12 × 12 × 12 |
| Grid spacing | x = 10, 1.5, 1.5, 3, 6, 13, 13, 6, 3, 1.5, 1.5, 10 cm |
| y = z = same as x | |
| Dual-porosity | |
| Grid dimensions | 1 × 1 × 1 |
| Grid spacing | 50 cm × 50 cm × 50 cm |
| Common data for all models | |
| Matrix porosity | 0.6 |
| Matrix permeability | 1 mD |
| Fracture porosity | 0.07 |
| Fracture permeability | 600 mD |
| Matrix initial pressure | 30 MPa |
| Fracture initial pressure | 20 MPa |