Open Access
Issue
Oil Gas Sci. Technol. – Rev. IFP Energies nouvelles
Volume 65, Number 6, November-December 2010
Page(s) 883 - 892
DOI https://doi.org/10.2516/ogst/2009069
Published online 01 November 2010
  • Abdelghaffar W.A., Karimi K., Heikai M.R. (2007) Fuel spray penetration in high pressure diesel engines, SAE Tech. Paper Series 2007-01-0066.
  • Bosch W. (1966) The fuel rate indicator: A new measuring instrument for display of the characteristics of individual injection, SAE Tech. Paper Series 660749.
  • Desantes J.M., Payri R., Garcia A., Manin J. (2009) Experimental Study of Biodiesel Blends’ Effects on Diesel Injection Processes, Energ. Fuel. 23, 3227-3235. [CrossRef]
  • Fang T., Lin Y., Foong T.M., Lee C.F. (2008) Spray and combustion visualization in an optical HSDI diesel engine operated in lowtemperature combustion mode with bio-diesel and diesel fuels, SAE Tech. Paper Series 2008-01-1390.
  • He C., Ge Y., Tan J., Han X. (2008) Spray properties of alternative fuels: A comparative analysis of biodiesel and diesel, Int. J. Energ. Res. 32, 1329-1338. [CrossRef]
  • Kim H.J., Suh H.K., Park S.H., Lee C.S. (2008a) An experimental and numerical investigation of atomization characteristics of biodiesel, dimethyl ether, and biodiesel-ethanol blended fuel, Energ. Fuel. 22, 3, 2091-2098. [CrossRef]
  • Kim H.J., Suh H.K., Lee C.S. (2008b) Numerical and experimental study on the comparison between diesel and DiMethyl Ether (DME) spray behaviors according to combustion chamber shape, Energ. Fuel. 22, 4, 2851-2860. [CrossRef]
  • Lee C.S., Park S.W., Kwon S.I. (2005) An experimental study on the atomization and combustion characteristics of biodiesel-blended fuels, Energ. Fuel. 19, 5, 2201-2208. [CrossRef]
  • Li J., Yoshio S., Akira N. (2001) An Experimental Study on DME Spray Characteristics and Evaporation Processes in a High Pressure, SAE Tech. Paper Series 2001-01-3635.
  • Payri F., Desantes M., Arregle J. (1996) Characterization of D.I. diesel sprays in high density conditions, SAE Tech. Paper Series 960774.
  • Pogorevc P., Kegl B., Skerget L. (2008) Diesel and Biodiesel Fuel Spray Simulations, Energ. Fuel. 22, 1266-1274. [CrossRef]
  • Roisman I.V., Araneo L., Tropea C. (2007) Effect of ambient pressure on penetration of a diesel spray, Int. J. Multiphas. Flow 33, 904-920. [CrossRef]
  • Sidu X., Mingfa Y., Junfeng X. (2001) An Experimental Investigation on the Spray Characteristics of Dimethyl Ether (DME), SAE Tech. Paper Series 2001-01-0142.
  • Sorenson S.C., Glensvig M., Abata D.L. (1998) Dimethyl ehther in diesel fuel injection system, SAE Tech. Paper Series 981159.
  • Teng H., McCandless J.C. (2005) Comparative study of characteristics of diesel-fuel and dimethyl-ether sprays in the engine, SAE Tech. Paper Series 2005-01-1723.
  • Teng H., McCandless J.C., Schneyer J.B. (2001) Thermochemical characteristics of dimethyl ether-An alternative fuel for compressionignition engines, SAE Tech. Paper Series 2001-01-0154.
  • Teng H., McCandless J.C., Schneyer J.B. (2002) Viscosity and lubricity of (liquid) dimethyl Ether-An alternative fuel for compression- ignition engines, SAE Tech. Paper Series 2002-01-0862.
  • Teng H., McCandless J.C., Schneyer J.B. (2003) Compression ignition delay (physical + chemical) of dimethyl ether - An alternative fuel for compression-ignition engines, SAE Tech. Paper Series 2003-01-0759.
  • Teng H., McCandless J.C., Schneyer J.B. (2004) Thermodynamic properties of dimethyl ether - An alternative fuel for compressionignition engines, SAE Tech. Paper Series 2004-01-0093.
  • Wu Z., Zhu Z., Huang Z. (2006) An experimental study on the spray structure of oxygenated fuel using laser-based visualization and particle image velocimetry, Fuel 85, 1458-1464. [CrossRef]
  • Yamashita H., Suzuki T., Matsuoka H., Mashida M., Kitano K. (2007) Research of the DI diesel spray characteristics at high temperature and high pressure ambient, SAE Tech. Paper Series 2007- 01-0665.
  • Yoon S.H., Park S.H., Lee C.S. (2008) Experimental investigation on the fuel properties of biodiesel and its blends at various temperatures, Energ. Fuel. 22, 1, 652-656. [CrossRef]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.